Elvas Tower: Turntable Paradox - Elvas Tower

Jump to content

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

Turntable Paradox Loco Reversed. Rate Topic: -----

#11 User is offline   jonas 

  • Engineer
  • Group: Status: Contributing Member
  • Posts: 548
  • Joined: 04-April 14
  • Gender:Male
  • Simulator:MSTS & OR
  • Country:

Posted 17 May 2021 - 04:35 PM

View PostSandy River Tom, on 17 May 2021 - 02:54 AM, said:

...
Since this has been fixed before, can you give me instructions on how to fix it,
so that it connects forward to Stall #1?
Tom, if I understand correctly, your problem is primarily the interchange of the G and Shift-G keys. This can only be fixed with a more recent OR version than your v1.3.4310.
At stall #1, however, the "Information: Turntable Backward Connected" will still be displayed, but this should not be a problem. But the G keys should then work correctly.

#12 User is offline   Sandy River Tom 

  • Senior Foreman of Engines
  • Group: Status: Senior Foreman, Engines
  • Posts: 1,797
  • Joined: 22-April 06
  • Gender:Male
  • Location:Mystic, Connecticut
  • Simulator:ORTS-V1.5.1
  • Country:

Posted 17 May 2021 - 04:45 PM

Guys.
Listen Carefully.
The MESSAGE (Forward, or Backward Connected) is NOT the issue.
Nothing posted so far helps me FIX my problem!

My Issue is that Stall #1 connects "Backward" and "reverses" the Loco's switch and Coupler/AngleCock/Air Hose connections.
It didn't do that before, and I'm still using the SAME ORTS Version!

What I need to know is how to FIX the Turntable issue so Stall #1 connects "FORWARD".

If I can explain the issue further, PLEASE PM ME!!!!!

#13 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 17 May 2021 - 11:06 PM

Tom,
sorry, but I don't provide support for stable version 1.3, because it is very outdated. I support (if I'm able to) only the actual testing version, or the OR NewYear MG version.
The fact that it worked before is only by accident, because it in principle depends from the sequence and/or the orientation you used to lay down the various track sections.
I suggest you to switch to the official testing version or to the OR NewYear MG version.

#14 User is offline   Sandy River Tom 

  • Senior Foreman of Engines
  • Group: Status: Senior Foreman, Engines
  • Posts: 1,797
  • Joined: 22-April 06
  • Gender:Male
  • Location:Mystic, Connecticut
  • Simulator:ORTS-V1.5.1
  • Country:

Posted 18 May 2021 - 05:20 AM

Carlo,

Sorry I got so wound-up yesterday, but this reversal problem has been making me crazy for a week. :furiousPC:

I may have caused the problem when I re-laid the Stall #1 track to eliminate a bad bump at the TT end.
But then, when I tried running a previous/un-edited version of the Route, it had the problem also!

I think it's time to bite-the-bullet and update to MG. :good:

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users