As was early in OR NewYear MG, in the actual Unstable releases the 2D cab doesn't darken at night. Dennis successfully provided me a patch for this (that I don't find at the moment), that was further amended by Steffen I believe.
Edit:
this http://www.elvastowe...post__p__228752 and following posts have a solution for that,
and this http://www.elvastowe...post__p__240217 are of interest
Page 1 of 1
2D cab doesn't darken at night
#2
Posted 26 October 2020 - 04:18 AM
Csantucci, on 26 October 2020 - 03:09 AM, said:
As was early in OR NewYear MG, in the actual Unstable releases the 2D cab doesn't darken at night. Dennis successfully provided me a patch for this (that I don't find at the moment), that was further amended by Steffen I believe.
Edit:
this http://www.elvastowe...post__p__228752 and following posts have a solution for that,
and this http://www.elvastowe...post__p__240217 are of interest
Edit:
this http://www.elvastowe...post__p__228752 and following posts have a solution for that,
and this http://www.elvastowe...post__p__240217 are of interest
I've successfully applied my patch for this problem but I can't remember if I also incorporated Steffen's mod in it. I need to do more research.
Dennis
#3
Posted 26 October 2020 - 05:10 AM
Dennis,
if you haven't yet done this, may I also draw your attention to two private conversations we have, one with last message dated 20/11/2018 and one with last message dated 3/11/2020: there are many of your patches there.
if you haven't yet done this, may I also draw your attention to two private conversations we have, one with last message dated 20/11/2018 and one with last message dated 3/11/2020: there are many of your patches there.
#4
Posted 28 October 2020 - 01:27 AM
dennisat, on 26 October 2020 - 04:18 AM, said:
I've successfully applied my patch for this problem but I can't remember if I also incorporated Steffen's mod in it. I need to do more research.
I'm sure my patch fixed Steffen's problem but now I come to test it, it's not working on my test system now! I have several test versions of OR so I'm going to go through them to find out when and why the patch stopped working.
Dennis
#5
Posted 31 October 2020 - 06:51 AM
Hi,
Attached is a set of patches for:
1. Cater for Left Handed mouse users
2. Fix truncation warnings for Shaders
3. Fix 2D cab not darkening
4. Fix ETCS gauge not working.
I will shortly have some patches for TrackViewer
Dennis
MG Patches
Attached is a set of patches for:
1. Cater for Left Handed mouse users
2. Fix truncation warnings for Shaders
3. Fix 2D cab not darkening
4. Fix ETCS gauge not working.
I will shortly have some patches for TrackViewer
Dennis
MG Patches
#6
Posted 23 November 2020 - 10:49 PM
I have submitted a patch to James to fix this issue. It takes inspiration from the NewYear fork, but it also takes a slightly different approach. Specifically, I have replaced the string materialsKey with a tuple, because tuples are much easier to work with.
By the way, dennisat, your patches are no longer downloadable.
By the way, dennisat, your patches are no longer downloadable.
Page 1 of 1