With the Trackviewer in unstable Release Open Rails U2020.10.16-2036 2020-10-16 21-43-15 and newer
I can't start any Route in Trackviewer. Independant if I start it over OR-Menu or direct in the OR_Folder
I get the attached Error.
Can't start a route in Trackviewer
#4
Posted 21 October 2020 - 02:34 AM
I assume that this is due to the new porting to Monogame.
#5
Posted 21 October 2020 - 03:29 AM
It appears the Monogame base that has been used is missing many of the fixes and enhancements that are in the OR New Year version.
Dennis
Dennis
#6
Posted 21 October 2020 - 02:01 PM
Is this close to being fixed? I have a path which needs to be edited in a way that can only be done by Track Viewer.
#7
Posted 21 October 2020 - 04:32 PM
Probably not the answer you're looking for but the version of Track Viewer included with the most recent testing release (and I suspect the stable version) works just fine until the issue in newer versions is fixed.
#8
Posted 03 November 2020 - 03:57 AM
Attached are patches to fix the current problems with the Unstable OR version of TrackViewer
Dennis
TrackViewer patches
Dennis
TrackViewer patches
#9
Posted 03 November 2020 - 05:10 AM
Hi Folks,
Please keep in mind that ReShade seems to kill TrackViewer as well - I have a simple BAT to remove ReShade when starting TrackViewer - replacing it when done.
Regards,
Scott
Please keep in mind that ReShade seems to kill TrackViewer as well - I have a simple BAT to remove ReShade when starting TrackViewer - replacing it when done.
Regards,
Scott
#10
Posted 15 November 2020 - 06:54 AM
Hello,
I have same issue. I found out it is caused from version U2020.10.18-0851 2020-10-18 09:58:14
There was only change in Pull request #292 at 85bd4e98a: SignalScript parsing reports unnecessary exceptions.
If I found out correctly, there was no update for trackviewer itself.
Unfortunatelly I don't have pemission to download patch from dennisat.
Vasi
I have same issue. I found out it is caused from version U2020.10.18-0851 2020-10-18 09:58:14
There was only change in Pull request #292 at 85bd4e98a: SignalScript parsing reports unnecessary exceptions.
If I found out correctly, there was no update for trackviewer itself.
Unfortunatelly I don't have pemission to download patch from dennisat.
Vasi