Elvas Tower: DetTol timetable_or - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

DetTol timetable_or Rate Topic: -----

#1 User is offline   jpmackay 

  • Conductor
  • Group: Status: R.I.P. or just Retired
  • Posts: 408
  • Joined: 11-March 08
  • Gender:Male
  • Country:

Posted 10 July 2020 - 06:02 AM

I am not sure what is the problem with this timetable_or for the work in progress route, DetTol by amtrakmattburb. Anyway here is the log file at the bottom of this message. I think that the problem is with the signals and am sure roeter or someone else on the developmental team know what is the problem . Also I noticed that the other problem is with the CVF files of the locomotives too.

Thank you,

John

Attached File(s)



#2 User is offline   vince 

  • Superintendant
  • Group: Status: Elite Member
  • Posts: 1,312
  • Joined: 18-June 14
  • Gender:Male
  • Location:West of the Contental Divide
  • Simulator:ORTS_Running MSTS_Editing
  • Country:

Posted 10 July 2020 - 11:40 AM

Hi John,
Looking through the log I see a route with a lot of signal errors. I think that would affect any timetable or for that matter, any activity.

Also is called out missing consist:

Quote

Could not find file 'J:\2MSTS\Trains\Consists\DetTolTT_NSNIntermodal.con'
along with cabview problems and others.
You have problems with the route and rolling stock. This ones calling out the exact wag file and the bad line in the file.
Warning: Cannot parse the constant number 27.2.2 in J:\2MSTS\Trains\trainset\SLI_NS_HOPPERS\NS_252018_PS4750_LD.wag:line 58 

Open the wag file with Context and look in the file to see what's wrong.
The signal errors you'll need to take up with the route builder.
I don't see any Open Rails problems here at all John, just the route and rolling stock.

regards and stay safe,
vince




#3 User is offline   jpmackay 

  • Conductor
  • Group: Status: R.I.P. or just Retired
  • Posts: 408
  • Joined: 11-March 08
  • Gender:Male
  • Country:

Posted 10 July 2020 - 01:47 PM

Thank you Vince for your helpful message. I thought that the signals is nothing to do with timetable_or and the problem is in the hands of route builder, amtrakmattburb. Now about the program of Context and I have them for a while but never realize that can check more than I expected. Will look into this to see what is the error line and see if that need to be correct.

Thank you again,

John

#4 User is offline   ebnertra000 

  • Superintendant
  • Group: Status: Elite Member
  • Posts: 1,234
  • Joined: 27-February 17
  • Gender:Male
  • Location:East-Central Minnesota
  • Simulator:OR/TSRE
  • Country:

Posted 10 July 2020 - 02:34 PM

The signals are my sets. Those errors shouldn't affect activities, as they're just duplicate signal types in the sigcfg file. Almost certaiy they're the same thing, so whichever OR decides to use, nothing should change

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users