Hello,
Always if i change cabview the lever of dynamic brake will be set to a specific %.
Most of this problems is with blended trains or if you change cabview from blended train, to a locomotive without blended.
If you change too cabview from train without dynamic brake and without lever, you have a problem :-(.
You can see this probleem very good with blended trains that have a independent lever for dynamic brake too (German trains example)
In real on this german trains you can choose if lever must be handled with trainbrakelever or not.
By trains with dynamic brake on combined power handle (traction/dynamic), this lever is Always 100% in negative area on cabviewchange.
For me this is a bug.
Page 1 of 1
Problems with Dynamic brake & changing cabview
Page 1 of 1