Good morning!
I would like to ask you if on TSRE5 there is the possibility of being able to have lighter photorealistic textures, setting the size (in my case 1024x1024).
I noticed that on the settings file there is a line suitable for this resizing but I deduced that it does not work with Mapbox ..
The Raster Z17 textures have a size of 49.169kb ..
So in this case, on a scenario like mine, I have a Terrtex folder at least 40GB in size ..!
Luckily it is a personal modification .. but it would be convenient to be able to resize them ...!
Page 1 of 1
Mapbox and Textures Sizes
#2
Posted 23 March 2020 - 05:38 AM
TSRE Support forum is here http://www.onrails.e...5717bbc135a2295
#3
Posted 23 March 2020 - 09:36 AM
Do keep in mind the tiles themselves are skewed per the Goode-Homosoline projection and so no aerial images will properly line up with the terrain.
#4
Posted 23 March 2020 - 09:57 AM
I am successfully using the DXTBmp program from https://www.mwgfx.co...rams/dxtbmp.htm -converts 48.0 MB *_map.ace to 2.66 MB *_map.dds
#5
Posted 23 March 2020 - 01:40 PM
Thanks for the link to DxtBmp. Do you have any recommended format for OR please? There are a lot of options.
I would very much like to reduce my _map from the current 23gb
Thanks again, Rick
I would very much like to reduce my _map from the current 23gb
Thanks again, Rick
#6
Posted 24 March 2020 - 07:14 AM
The link is very useful, could you explain the procedure to make sure that the textures once converted can work on Open Rails?
Page 1 of 1