Page 1 of 1
Removing bushes from the track
#1
Posted 24 June 2019 - 11:25 AM
By inserting following line in the TRK file, ORTSUserPreferenceForestClearDistance ( 2 ), you can remove trees from the track.
Is it also possible to remove bushes?
Is it also possible to remove bushes?
#2
Posted 24 June 2019 - 01:43 PM
Yes, if the bushes are forest region objects.
regards,
vince
regards,
vince
#3
Posted 24 June 2019 - 02:11 PM
#4
Posted 24 June 2019 - 03:52 PM
Any shape that uses forest region to define them will be removed from the right of way
#5
Posted 24 June 2019 - 04:23 PM
Hi,
I used the replace shape function in Route Riter to replace treelines on a route project. As a result, there are several locations on route that have trees on track. I take it that putting the tree exclusion entry in the OR track file wouldn’t resolve this situation.
I used the replace shape function in Route Riter to replace treelines on a route project. As a result, there are several locations on route that have trees on track. I take it that putting the tree exclusion entry in the OR track file wouldn’t resolve this situation.
#6
Posted 24 June 2019 - 06:51 PM
Correct. The shapes you replaced most likely have a different 'pivot' or 'origin' point location and are not Forest Objects.
regards,vince
regards,vince
#7
Posted 25 June 2019 - 06:07 AM
Thanks jan111,
I needed to be reminded of this fix for a recently installed route.
Regards Geoff.
I needed to be reminded of this fix for a recently installed route.
Regards Geoff.
#8
Posted 02 January 2021 - 02:07 PM
#10
Posted 03 January 2021 - 03:37 PM
Found it in Manual (must have missed it before)
Thanks
Thanks
Page 1 of 1