ProTrain 10 have Thalys train. Like other TGV it have Jacobs boogie but here is problem screen below. Here is coupling setting. Maybe it give some help.
Coupling (
Type ( Bar )
Spring (
Stiffness ( 2e7N/m 0 )
Damping ( 0.2e7N/m/s 0 )
Break ( 1e7N 0 )
r0 ( 0.0m 0.1m )
)
CouplingHasRigidConnection ()
Velocity ( 0.1m/s )
CouplingUniqueType ( "Thalys" )
)
Buffers (
Spring (
Stiffness ( 1e7N/m 0 )
Damping ( 1e6N/m/s 0 )
r0 ( 0m 0.1m )
)
Centre ( 0.5 )
Radius ( 1 )
Angle ( 0.5deg )
)
Adheasion ( 0.2 0.4 2 0 )
DerailRailHeight ( 10cm )
DerailRailForce ( 100t )
DerailBufferForce ( 200kN )
NumWheels ( 4 )
Friction (
350N/m/s 0 1mph 0.763N/m/s 1.86
5.1N/rad/s 1 -1rad/s 0 1
)
https://zapodaj.net/images/09003987be7ba.jpg
https://zapodaj.net/images/50323cfdee2f5.jpg
Page 1 of 1
Problem with Jacobs boogie.
#2
Posted 04 June 2019 - 11:13 AM
I'm glad you brought this up. I have the same problem. Works great in MSTS though. It only shows this problem in OR. I don't think rotating the bogie will solve the problem?
#3
Posted 09 June 2019 - 11:06 AM
Can the bogie be decompressed and rotated through 90 degrees using Shape File Manager?
#4
Posted 12 July 2019 - 12:48 PM
hello, a new model of this tgv thalys pba and pbka is available here:https://www.lescompagnonsdurail.fr/materiel-moteur-electrique
#7
Posted 31 July 2019 - 03:26 PM
Thalys PBA & PBKA of compagnons du rail, is with my cabviews, engineering ;-)
Since few days i have test with 1 unit, with own 15&25kV traction table and dynamic brake table.
Since few days i have test with 1 unit, with own 15&25kV traction table and dynamic brake table.
Page 1 of 1