[Csantucci]

I had withdrawn rev 135 yesterday evening because it had a bug, signalled by Aldarion. Now rev. 135.1 has amended this and is downloadable.

[Aldarion]

I'm still having another problem in one locomotive (so far) wich I dont have in OR 1.5

Attached File(s)

•  OpenRailsLog.txt (19.63K)
  Number of downloads: 7

[Csantucci]

Can you provide a download link to the locomotive (cabview included) generating the problem?

[alteo80]

Csantucci, on 08 December 2022 - 07:43 AM, said:

Can you provide a download link to the locomotive (cabview included) generating the problem?

good evening, beyond v132, I have a problem with this material (mf77, paris metro), I think it comes from the combined commands, I am attaching useful files. thank you for the help:)

Attached File(s)

•  OpenRailsLog.txt (17.27K)
  Number of downloads: 5
•  MF77.eng.TXT (19.55K)
  Number of downloads: 2
•  cab77.cvf.txt (5.66K)
  Number of downloads: 0

[Csantucci]

Hello,
please try to apply following patch to ORNYMG 135.1 and report if the problem is solved.
 Orts.Simulation.zip (1.63MB)
Number of downloads: 2

Can you tell me please where I can download the trainset and its cab?

[Niknak]

Version 135.1 DOES support saves from the previous version 134

[alteo80]

Csantucci, on 09 December 2022 - 01:17 AM, said:

Hello,
please try to apply following patch to ORNYMG 135.1 and report if the problem is solved.
Orts.Simulation.zip

Can you tell me please where I can download the trainset and its cab?

hello, the link for the mf77 material: https://onedrive.liv...t&action=locate .thank you for your help,the problem is solved with your files :sign_thanks:

[Csantucci]

ORNYMG rev 135.2 solves the bug reported by alteo80 and also this https://bugs.launchp...or/+bug/1999253 Night .dds texture not loaded.

[charland]

RESOLVED By adding a "Last" signal at the west end of the yard.

Paul :-)
 OpenRailsLog.txt (16.37K)
Number of downloads: 4Having a problem after signaling my route.

The activity is set up to run light between the yards in Amsterdam to Fonda, then return to the Amsterdam yard. This is the first time I've run anything after installing signals on the Conrail mainline so I've been starting, running a ways until I get to an unexpected signal, stopping and changing the setting, then starting again.

I made it to the Fonda yard where I ran around my caboose before heading back to Amsterdam.. After getting back on the path, I noticed the displayed information in the track monitor stayed showing the train at the bottom and also going in that direction. If that was the case I would not see any signal or speed limit I was approaching until I was on it. After travelling about a mile, I was just about to enter the mainline, and when I was on top of the first switch the train stopped, the track monitor went blank but I could still hear the engine. After about ten seconds OR crashed.


https://images2.imgbox.com/21/96/ubcCib9o_o.jpg



Paul :-)

[charland]

*****
Update on this...

I removed both Last signals from the Fonda yard and that appears to have cured the problem I was having.
****

Back to the same problem I reported above but in 135.2.

After adding the "Last" signal at the west end of the yard last night (in 132.1) I was able to pass the signal when returning to Amsterdam from the Fonda yard. This morning I upgraded to 135.2 and when I return eastbound and pass the Last signal (facing west) my train goes into emergency and about a second later the screen freezes but the sound keeps on going.

The monitor worked last night after adding the last signal at the west end of the Fonda yard but has returned to the same state that is shown in my screenshot from last night.

Can not exit the activity using Escape, only Ctrl+Alt+Delete and Task Master. This is also true if you run a train off the end of the track.

 OpenRailsLog.txt (11.33K)
Number of downloads: 4


Paul :-)