Log In
Register Now!
Help
Quote
Please don't change things that don't need to be changed that will cause our files to be broken... or if you really want to, then you really should be obliged to code a utility that will update our files to conform to the new rule.
OR NewYear MG
Rate Topic:
4 Votes
#141
- Executive Vice President
-
- Group: ET Admin
- Posts: 3,438
- Joined: 14-March 13
- Gender:Male
- Location:known universe
- Simulator:Open Rails
-
Country:
Posted 08 June 2019 - 09:00 AM
I have a fundamental preference for precision in files....makes work easier in the long run.... However, I also completely agree with this very sound principle
#142
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 08 June 2019 - 12:36 PM
I would like to give a chance to the new signal script parser, and I am awaiting a revised version by perpetualKid. If after some few iterations problems will continue to arise (I hope not), I might revert to the original parser.
At the moment I make available the preceding release of OR NewYear MG, that is release 22, which hasn't the new parser : http://www.interazio...Year_MG_old.zip , for people that don't want to experiment.
At the moment I make available the preceding release of OR NewYear MG, that is release 22, which hasn't the new parser : http://www.interazio...Year_MG_old.zip , for people that don't want to experiment.
#143
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 11 June 2019 - 12:02 PM
Rel. 24 of OR NewYear MG is available as always here http://www.interazio..._NewYear_MG.zip .
It is aligned with rel. x1.3.1-64 of the standard OR; moreover the MG adaptations are aligned with those of perpetualKid, which now is refining the MG adaptations.
Additional features not (yet) available in the standard OR are:
- addition of track sounds in the sound debug window (by dennisat)
- change of the font family and dimension for the digital displays in 2D cabs
- UPDATED: F5 HUD scrolling by mbm_OR (with improvement requested by steamer_ctn)
- checkbox in General Options tab to enable or disable watchdog
- increase of remote horn sound volume level
- enable/disable on screen control confirmations with Ctrl-Alt-F10
- removal of on screen notification of camera change
- improved dynamic management of trough refill, see here http://www.elvastowe...-water-troughs/ , by steamer_ctn
- activity specific options setting, see here http://www.elvastowe...post__p__247247 , by steamer_ctn
- preparation for advanced management of couplers, see here http://www.elvastowe...vanced-coupler/ , by steamer_ctn
- when car is selected through the F9 window, the car's brake line in the extended brake HUD is highlighted in yellow, see here http://www.elvastowe...post__p__248023 (by mbm_or)
- enhanced human dispatching for AI trains, see here http://www.elvastowe...post__p__247752 .
- removed bug in OR MG concerning display of ETCS gauge (by dennisat)
- removed OR-MG specific bug not displaying some icons in TrackViewer (by dennisat)
- improved distance management in roadcar camera
- animation of bell, see here http://www.elvastowe...bell-animation/ (with the support of mrmosky) (now bell animation FPS can be tuned via .sd file)
- signal script parser (by perpetualKid): reduces CPU time needed for signal management
- UPDATED: removed major bug in signal script parser (by perpetualKid)
- UPDATED: second phase of wheel bearing management, see here http://www.elvastowe...earing-impacts/ (by steamer_ctn)
I hope that this release solves Icik's problems. Moreover the warnings where isolated # operators are present in sigscr.dat have been removed.
Release 22, that has the standard parser, is still downloadable, but I'd prefer to have feedbacks on this new version.
It is aligned with rel. x1.3.1-64 of the standard OR; moreover the MG adaptations are aligned with those of perpetualKid, which now is refining the MG adaptations.
Additional features not (yet) available in the standard OR are:
- addition of track sounds in the sound debug window (by dennisat)
- change of the font family and dimension for the digital displays in 2D cabs
- UPDATED: F5 HUD scrolling by mbm_OR (with improvement requested by steamer_ctn)
- checkbox in General Options tab to enable or disable watchdog
- increase of remote horn sound volume level
- enable/disable on screen control confirmations with Ctrl-Alt-F10
- removal of on screen notification of camera change
- improved dynamic management of trough refill, see here http://www.elvastowe...-water-troughs/ , by steamer_ctn
- activity specific options setting, see here http://www.elvastowe...post__p__247247 , by steamer_ctn
- preparation for advanced management of couplers, see here http://www.elvastowe...vanced-coupler/ , by steamer_ctn
- when car is selected through the F9 window, the car's brake line in the extended brake HUD is highlighted in yellow, see here http://www.elvastowe...post__p__248023 (by mbm_or)
- enhanced human dispatching for AI trains, see here http://www.elvastowe...post__p__247752 .
- removed bug in OR MG concerning display of ETCS gauge (by dennisat)
- removed OR-MG specific bug not displaying some icons in TrackViewer (by dennisat)
- improved distance management in roadcar camera
- animation of bell, see here http://www.elvastowe...bell-animation/ (with the support of mrmosky) (now bell animation FPS can be tuned via .sd file)
- signal script parser (by perpetualKid): reduces CPU time needed for signal management
- UPDATED: removed major bug in signal script parser (by perpetualKid)
- UPDATED: second phase of wheel bearing management, see here http://www.elvastowe...earing-impacts/ (by steamer_ctn)
I hope that this release solves Icik's problems. Moreover the warnings where isolated # operators are present in sigscr.dat have been removed.
Release 22, that has the standard parser, is still downloadable, but I'd prefer to have feedbacks on this new version.
#145
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 12 June 2019 - 01:55 AM
Icik,
I have uploaded a slightly improved version. Can you try with that one?
If you still have the problem, can you attach here OpenRailsLog.txt? Where can I download the route, and can you attach the path here?
I have uploaded a slightly improved version. Can you try with that one?
If you still have the problem, can you attach here OpenRailsLog.txt? Where can I download the route, and can you attach the path here?
#146
- Conductor
-
- Group: Status: Active Member
- Posts: 308
- Joined: 19-April 15
- Simulator:Open Rails
-
Country:
Posted 12 June 2019 - 07:07 AM
Hi Carlo,
it's just a free ride.
I attach the log of revision 22 and also the revision 24.
Global Link: http://msts.jacek-mo.../310/GLOBAL.ZIP
Route link: http://msts.jacek-mo.../CR_310_6.0.exe
it's just a free ride.
I attach the log of revision 22 and also the revision 24.
Global Link: http://msts.jacek-mo.../310/GLOBAL.ZIP
Route link: http://msts.jacek-mo.../CR_310_6.0.exe
Attached File(s)
-
REV_22_OpenRailsLog.txt (15.93K)
Number of downloads: 10 -
REV_24_OpenRailsLog.txt (16.94K)
Number of downloads: 15 -
sigcfg.dat.txt (1.3MB)
Number of downloads: 10 -
sigscr.dat.txt (49.7K)
Number of downloads: 12
#147
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 12 June 2019 - 08:50 AM
Hi Icik,
fortunately I already had the route. I get the problem too, so I will try to understand something.
fortunately I already had the route. I get the problem too, so I will try to understand something.
#148
- Fireman
-
- Group: Status: Active Member
- Posts: 103
- Joined: 07-July 12
- Gender:Male
- Location:South West Wales.
- Simulator:OR MonoGame
-
Country:
Posted 13 June 2019 - 05:56 AM
Many thanks for Rel 24, Carlo.
As always, very much appreciate all the work put into the MG version.
Mike.
As always, very much appreciate all the work put into the MG version.
Mike.
#149
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 13 June 2019 - 07:15 AM
Thanks Dogbert.
For people using Win10, it is suggested to unpack the OR MG pack using 7zip, to avoid MS taking unneeded security measures.
For people using Win10, it is suggested to unpack the OR MG pack using 7zip, to avoid MS taking unneeded security measures.
#150
- Member, Board of Directors
-
- Group: Status: Elite Member
- Posts: 7,000
- Joined: 31-December 11
- Gender:Male
-
Country:
Posted 14 June 2019 - 12:17 PM
Rel. 25 of OR NewYear MG is available as always here http://www.interazio..._NewYear_MG.zip .
It is aligned with rel. x1.3.1-64 of the standard OR; moreover the MG adaptations are aligned with those of perpetualKid, which now is refining the MG adaptations.
Additional features not (yet) available in the standard OR are:
- addition of track sounds in the sound debug window (by dennisat)
- change of the font family and dimension for the digital displays in 2D cabs
- UPDATED: F5 HUD scrolling by mbm_OR (with improvement requested by steamer_ctn)
- checkbox in General Options tab to enable or disable watchdog
- increase of remote horn sound volume level
- enable/disable on screen control confirmations with Ctrl-Alt-F10
- removal of on screen notification of camera change
- improved dynamic management of trough refill, see here http://www.elvastowe...-water-troughs/ , by steamer_ctn
- activity specific options setting, see here http://www.elvastowe...post__p__247247 , by steamer_ctn
- preparation for advanced management of couplers, see here http://www.elvastowe...vanced-coupler/ , by steamer_ctn
- when car is selected through the F9 window, the car's brake line in the extended brake HUD is highlighted in yellow, see here http://www.elvastowe...post__p__248023 (by mbm_or)
- enhanced human dispatching for AI trains, see here http://www.elvastowe...post__p__247752 .
- removed bug in OR MG concerning display of ETCS gauge (by dennisat)
- removed OR-MG specific bug not displaying some icons in TrackViewer (by dennisat)
- improved distance management in roadcar camera
- animation of bell, see here http://www.elvastowe...bell-animation/ (with the support of mrmosky) (now bell animation FPS can be tuned via .sd file)
- signal script parser (by perpetualKid): reduces CPU time needed for signal management
- UPDATED: removed further major bug in signal script parser (by perpetualKid with the support of eugenR)
- second phase of wheel bearing management, see here http://www.elvastowe...earing-impacts/ (by steamer_ctn)
- NEW: corrected bug that didn't display smoke and steam of own loco when within a 3Dcab (by dennisat).
I started Icik's route with this release and it seems to correct the problem evidenced.
It is suggested to unpack the .zip using 7zip, if other unpackers lead to problems.
It is aligned with rel. x1.3.1-64 of the standard OR; moreover the MG adaptations are aligned with those of perpetualKid, which now is refining the MG adaptations.
Additional features not (yet) available in the standard OR are:
- addition of track sounds in the sound debug window (by dennisat)
- change of the font family and dimension for the digital displays in 2D cabs
- UPDATED: F5 HUD scrolling by mbm_OR (with improvement requested by steamer_ctn)
- checkbox in General Options tab to enable or disable watchdog
- increase of remote horn sound volume level
- enable/disable on screen control confirmations with Ctrl-Alt-F10
- removal of on screen notification of camera change
- improved dynamic management of trough refill, see here http://www.elvastowe...-water-troughs/ , by steamer_ctn
- activity specific options setting, see here http://www.elvastowe...post__p__247247 , by steamer_ctn
- preparation for advanced management of couplers, see here http://www.elvastowe...vanced-coupler/ , by steamer_ctn
- when car is selected through the F9 window, the car's brake line in the extended brake HUD is highlighted in yellow, see here http://www.elvastowe...post__p__248023 (by mbm_or)
- enhanced human dispatching for AI trains, see here http://www.elvastowe...post__p__247752 .
- removed bug in OR MG concerning display of ETCS gauge (by dennisat)
- removed OR-MG specific bug not displaying some icons in TrackViewer (by dennisat)
- improved distance management in roadcar camera
- animation of bell, see here http://www.elvastowe...bell-animation/ (with the support of mrmosky) (now bell animation FPS can be tuned via .sd file)
- signal script parser (by perpetualKid): reduces CPU time needed for signal management
- UPDATED: removed further major bug in signal script parser (by perpetualKid with the support of eugenR)
- second phase of wheel bearing management, see here http://www.elvastowe...earing-impacts/ (by steamer_ctn)
- NEW: corrected bug that didn't display smoke and steam of own loco when within a 3Dcab (by dennisat).
I started Icik's route with this release and it seems to correct the problem evidenced.
It is suggested to unpack the .zip using 7zip, if other unpackers lead to problems.