[scottb613]

Hi Folks,

Thanks one and all for your HERCULEAN efforts - true 64 Bit - here we come... Can't wait to give this a shot...

:sign_rockon:


 Capture.JPG (31.21K)
Number of downloads: 1


Regards,
Scott

[Icik]

Hi Carlo,
I found that the MG version strangely stretches the cabs in the vertical direction. Below you have a picture to compare the stable version of OR versus MG version. The pictures were taken with the stretch settings to 0% in the OR menu.

Could you please unify the cabin rendering format for both OR versions? Preferably prefer the format as in the stable version.

Attached File(s)

•  1.jpg (546.94K)
  Number of downloads: 21

[Csantucci]

Icik,
where can I download the cab? Does it have a texture bigger than 1024x1024?

[Csantucci]

railguy, on 06 January 2020 - 12:53 PM, said:

Carlo,

I have not checked this in a release past 45, but I did discover what might be a glitch in the F9 screen. When I run an activity that has a player train starting the activity at a speed greater than 0 mph and the throttle open past idle--for example, say, at 25% power, and I toggle the MU connection on a trailing locomotive later in the activity, that loco's throttle setting goes to what the throttle opening was at the beginning of the activity--in my example, 25%. The throttle setting on an isolated locomotive should always return to idle. (In prototypical operation, this is a safety feature to assure that an MU'ed locomotive will return to idle if the MU connection is severed for any reason.) In OR, reconnecting the cable, the trailing locomotive setting will then go back to whatever the controlling locomotive setting is. I'm not certain how long this "glitch" has been present, but I discovered it yesterday when running an activity where "isolating" a locomotive in the consist was necessary. Thanks for looking into this and a big THANKS for all then neat MG improvements!!!!

Hi,
rev. 48.3 is downloadable, which should solve this issue. Pls. check. It's an error which is present since years I assume.

[railguy]

It appears that the problem with precipitation crashing OR in V36 has crept back into V48.2. Attached is the log file showing the crash. Thanks in advance for looking into this.

Attached File(s)

•  OpenRailsLog.txt (136.3K)
  Number of downloads: 8

[Csantucci]

Thank you for reporting that. I've now uploaded rev. 48.4, which has a further protection against such crashes.

[Icik]

Csantucci, on 07 January 2020 - 07:54 AM, said:

Icik,
where can I download the cab? Does it have a texture bigger than 1024x1024?

Hi Carlo,
yes, it`s bigger. 1920x1080

It would be good if it was united. Many people in our community don't want to break away from the stable version yet.

Download:
http://www.msts-rw.c...oads/cab383.rar

[Csantucci]

Icik, on 08 January 2020 - 07:19 AM, said:

Hi Carlo,
yes, it`s bigger. 1920x1080

It would be good if it was united. Many people in our community don't want to break away from the stable version yet.

Download:
http://www.msts-rw.c...oads/cab383.rar

Hi Icik,
to check what I can do, I must have the cab available. I can't revert to the stable version, because the change made solves a form factor problem of a cab that was pointed out by Stijn.

[Woodfyr]

Haven't run OR/MG for a couple of weeks. Have been using Rev.34 with rewshade and Raildriver with no difficulties.
Uploaded MG Rev 48.3 and it runs okay via keyboard, until I try to start Raildriver, then Run Activity just stops.

What am I missing ?? Log text attached.

 OpenRailsLog.txt (37.26K)
Number of downloads: 7

[Csantucci]

Hi,
betweern rev. 34 and the actual revisions Raildriver setup has changed substantially. You must first go to the OR menu options page where you will notice a Raildriver label. Click on it and perform the calibration following the instructions. Check whether the key assignment is what you like, else change it, and check also whether the right-hand options are as you like. AFter having terminated your setup, click OK. You can start your activity.
Of course you need to do this only once, and later when you see that the Raildriver needs to be recalibrated.