Elvas Tower: Issues from stopping at a station after a reverse point - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Issues from stopping at a station after a reverse point Rate Topic: -----

#1 User is offline   hroch 

  • Fireman
  • Group: Status: Active Member
  • Posts: 198
  • Joined: 05-June 14
  • Gender:Male
  • Simulator:MSTS OR
  • Country:

Posted 02 January 2019 - 04:16 AM

Hello,

These problems occur after stopping at the second reverse point.
Attached Image: MSTS_AE.jpg
Stop in Dolni Benesov
Attached Image: zastavení_Dolni_Benesov.jpg
The distance to the end of the platform is changed after uncoupled from the consist.
Attached Image: odpojení_Dolní_Benesov.jpg
First reverse point works correctly.

1.Stop after second reverse point ( white reverse point ).
OR writes following station missed Dolni Benesov-Zabreh and disappears the distance to the next station.
Attached Image: zastavení_za_reversem.jpg
When driving to the third reserse point, the distance to the next station displayed. And omits one station.
Attached Image: priblizení_k_tretimu_RP.jpg
Stopping at Kravare-Kouty station does not work.

First stop at Kravare ve Slezku station.
Attached Image: první_zastavení_Kravare_ve_Slezku.jpg
Second stop at Kravare ve Slezku station.
Attached Image: druhé_zastavení_Kravere_ve_Slezku.jpg

2.Stop before second reverse point ( green reverse point ).
Attached Image: zastavení_pred_reversem.jpg
Disappears the distance to the next station. Stopping at Dolni Benesov-Zabreh and Kravare-Kouty stations does not work.
Attached Image: nefungují_Kravare_Kouty.jpg
First at Kravare ve Slezku station.
Attached Image: první_zastavení_Kravare_ve_Slezku_p.jpg
Second stop at Kravare ve Slezku station.
Attached Image: druhé_zastavení_Kravere_ve_Slezku_p.jpg
Third stop at Kravare ve Slezku station.
Attached Image: treti_zastavení_Kravare_ve_slezku_p.jpg
OpenLog
Attached File  OpenRailsLog.txt (20.82K)
Number of downloads: 219
My activity that shows this problem
Attached File  test_reverser_point.zip (1.81K)
Number of downloads: 246
Route download:
http://msts.jacek-mo...310_stazeni.htm
Route updates:
http://msts.jacek-mo...aktualizace.htm
Locomotive:
https://pikku.msts.c...es/CD714203.zip
Wagon:
https://pikku.msts.cz/files/CD810.rar

#2 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 02 January 2019 - 08:22 AM

Can you please check if you have the same problem with OR 1.2? This because between 1.2 and 1.3.1 some changes were made on station stop handling.

#3 User is offline   hroch 

  • Fireman
  • Group: Status: Active Member
  • Posts: 198
  • Joined: 05-June 14
  • Gender:Male
  • Simulator:MSTS OR
  • Country:

Posted 03 January 2019 - 03:57 AM

I have not version 1.2, but I conducted a test in 3807
Stop in Dolni Benesov
Attached Image: zastaveni_Dolni_Benesov.jpg
uncoupled from the consist
Attached Image: odpojení_Dolní_Benesov.jpg
Driving to the first reverse point
Attached Image: jizda_na_prvni_RP.jpg

First reverse point works correctly.

Driving to the second reverse point
Attached Image: jizda_na_druhý_RP.jpg
Stop after second reverse point. If it's green or white it's the same.
Attached Image: zastavení_za_druhým_RP.jpg
Driving to the third reverse point. Missing distance to next station and mark the platform in the track monitor.
Attached Image: jizda_na_treti_RP.jpg
Ride back to station Dolni Benesov-Zabreh. Missing distance to next station and mark the platform in the track monitor.
Attached Image: jizda_zpet_do_stanice_Dolni_benesov_Zabreh.jpg
Stop at station Dolni Benesov-Zabreh. Stopping (passenger boarding) at station Dolni Benesov-Zabreh work. Missing mark the platform in the track monitor.
Attached Image: zastaveni_Dolni_Benesov-Zabreh.jpg
Departure from the station Dolni Benesov-Zabreh. The distance to the next station is displayed, but omits one station.
Attached Image: rozjezd__Dolni_Benesov-Zabreh.jpg
Stop at station Kravare-Kouty. Stopping (passenger boarding) at station Kravare-Kouty work. Missing mark the platform in the track monitor.
Attached Image: zastavení_Kravare-Kouty.jpg
Stop at station Kravare ve Slezku works correctly.
Attached Image: zastavení_Kravare_ve_Slezku.jpg
OpenLog.
Missing warning: Train 0 service PLAYER, reversal or end point off path; reversal point considered remote
Attached File  OpenRailsLog3807.txt (20.2K)
Number of downloads: 242

#4 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 04 January 2019 - 04:53 AM

Must the route be installed as a mini-route? Must also the global zip be inatalled?

#5 User is offline   hroch 

  • Fireman
  • Group: Status: Active Member
  • Posts: 198
  • Joined: 05-June 14
  • Gender:Male
  • Simulator:MSTS OR
  • Country:

Posted 04 January 2019 - 06:08 AM

Yes global.zip must be installed. It is a modified xtrack only for this route. Put in into an empty folder.
The route 6.0 is better to have in a separate folder or as a mini track so there is no problem with compatibility with other routes. Download update 6.1 and let it overwrite everything. This same with update 6.2. I use a system of separate folders and rename them. From the times of MSTS.

#6 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 05 January 2019 - 12:08 PM

I've found the reason of the problem, which is a tricky and rare one, and also not trivial to solve.
The problem is that station Dolny Benesov-Zabreh (and also station Kravare-Kouty) is in the same track section of the second reversal point. OR does only a check if station is in a track section which is present in the list of track sections of a subpath, to assign such station to the subpath. So OR is expecting that the train finds Dolny Benesov-Zabreh before second reversal point. This does not occur, so the station is not found when the train runs. For the solution it is not necessary to check whether the station is before or after the reversal point of that subroute (check which I am introducing); that track section is present also in the subsequent subpath, and I still have to cope with this other circumstance.

#7 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 05 January 2019 - 01:25 PM

OK, I believe I found a solution.
Here are two runtime files to replace within last OR version (x.4332)
Attached File  Orts.Simulation_stationstops.zip (1.25MB)
Number of downloads: 240
and here is the source patch file
Attached File  Train_stationstoponwrongsubpath.cs.patch.zip (841bytes)
Number of downloads: 252

With these runtime files the activity runs correctly here. hroch, please open a bug report in Launchpad for this.

#8 User is offline   dforrest 

  • Foreman Of Engines
  • Group: Status: Contributing Member
  • Posts: 973
  • Joined: 12-January 12
  • Gender:Male
  • Location:St. Vincent (formally UK)
  • Simulator:MSTS, Open Rails
  • Country:

Posted 06 January 2019 - 03:33 AM

This sounds as if it may assist with the issue of reverse points in activities I have discussed in another thread. Will this be committed to an OR modification soon?

#9 User is offline   hroch 

  • Fireman
  • Group: Status: Active Member
  • Posts: 198
  • Joined: 05-June 14
  • Gender:Male
  • Simulator:MSTS OR
  • Country:

Posted 06 January 2019 - 04:28 AM

Excellent work Mr. Csantucci.
I am very happy that you have managed to solve it. For me works activity correctly too.
I've created an bug report: https://bugs.launchp...or/+bug/1810654

#10 User is offline   Csantucci 

  • Member, Board of Directors
  • Group: Status: Elite Member
  • Posts: 6,986
  • Joined: 31-December 11
  • Gender:Male
  • Country:

Posted 23 January 2019 - 12:24 AM

This is now fixed in both the MG and the official OR versions.

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users