I've been doing some new terrtex and also did some drawing on the old ones to fill in detail areas to show what to do when I made the modifications to the terrtex in PhotoShop. All of a sudden, when I select the route, TSRE5 opens with a white screen in place of the route, then closes down. All other routes will open fine.
Page 1 of 1
TSRE5 problem route won't open, just white screen, then closes
#2
Posted 14 December 2018 - 02:36 PM
It looked like I found the problem. It opened fine, once, but now, once again the outline of the program comes on, white screen only, stays for a few seconds then just closes.
#3
Posted 15 December 2018 - 07:16 AM
Hi Steve
Have you got a backup copy of your route?
If so save your current "problem" version and go back to a previous "OK" version.
Then try replacing the files a few at a time until you find the problem.
Garry
Have you got a backup copy of your route?
If so save your current "problem" version and go back to a previous "OK" version.
Then try replacing the files a few at a time until you find the problem.
Garry
#4
Posted 22 December 2018 - 04:30 PM
Thanks,
That's what I ended up doing, it was a single corrupt structure that I placed. I just added one at a time to the world file from the problem route to a back up.
Steve
That's what I ended up doing, it was a single corrupt structure that I placed. I just added one at a time to the world file from the problem route to a back up.
Steve
Page 1 of 1