Speed signal with OR_SPEEDRESET not working in explore route
#1
Posted 20 November 2018 - 12:10 PM
I've noticed, the SPEED typed signal with aspect marked by 'Signalflags (OR_SPEEDRESET)' does not work in explore route mode, but seems okay in 'Explore in Activity Mode'. I suppose it's not the way it should work. ORTS version: X4308, Windows 10 Pro 1809 64-bit.
#2
Posted 24 November 2018 - 08:01 AM
Szilard, on 20 November 2018 - 12:10 PM, said:
I've noticed, the SPEED typed signal with aspect marked by 'Signalflags (OR_SPEEDRESET)' does not work in explore route mode, but seems okay in 'Explore in Activity Mode'. I suppose it's not the way it should work. ORTS version: X4308, Windows 10 Pro 1809 64-bit.
I can confirm, this is a bug,
here I have reported it:
https://bugs.launchp...or/+bug/1804948
#4
Posted 29 November 2018 - 12:55 PM
Csantucci, on 28 November 2018 - 06:25 AM, said:
In Manualmode is the same problem as in explorermode.
In the Window F4 the Speedlimit stay at the reduced signalspeed, when the train is passing the OR_Speedreset.
Also the Speedsignal isn't displayed in the Windows F4.
Carlo, do you need a testroute?
#5
Posted 29 November 2018 - 01:38 PM
thank you, but at the moment I'm not keen to try solving the problem. If that worked in manual mode, passing that to explorer mode would have been quite straightforward, but if it has to be introduced also in manual mode, it's lengthier.
#6
Posted 30 November 2018 - 08:44 AM
This are working correct together with the Speed-Plates.
#7
Posted 01 December 2018 - 03:32 AM
I have here two files to replace into OR x.4321.
Can someone have a test? If the result of the test is negative, Eugen, I'd accept your offer of creating a test route :)
#8
Posted 02 December 2018 - 05:03 AM
thank you for having sent me the test route. With it I could developed what I think is a working solution.
Attached are the modified simulation files for x.4323.
Orts.Simulation_rev1.zip (1.25MB)
Number of downloads: 303
Tests with them are welcome.
#9
Posted 02 December 2018 - 07:52 AM
Csantucci, on 02 December 2018 - 05:03 AM, said:
thank you for having sent me the test route. With it I could developed what I think is a working solution.
Attached are the modified simulation files for x.4323.
Orts.Simulation_rev1.zip
Tests with them are welcome.
Hi Caro,
For me the OR_Speedreset is working now correct all Modes, incl. Timetable-Mode.
But we have now tested with the same Route, so I have asked "Szilard" by PM to test the patch also.
Perhaps You are waiting for some days before release the patch?
Thank You for the Your work.
EugenR
#10
Posted 02 December 2018 - 08:15 AM