Hi guys, I have some problem with the auto-placement in TSRE5. I'm trying to autoplace the Gantry over the track, but it seems that the auto-placement cannot put the Gantry shape in the right position.
Here is a screenshot of example:
https://preview.ibb.co/ecmTkJ/autoplacemnt.jpg
So far you can see the problem with the autoplacement, the gantry is basically not on the perfect center of the track (A2t500mStr). The image on the right shows the correct place of the Gantry (I putted it manually).
Anyway if I use a single track, like A1t100mStr, the gantry will be positioned on the perfect center of it. I think also that the issue is reproducible with any other objects.
Any solution for this issue?
Page 1 of 1
Auto-placement issue
#2
Posted 16 June 2018 - 05:59 AM
TSRE place objects along track vector, not shape file.
There are two solutions possible:
- make costom shape for TSRE
- use offset pption in auto placement settings. Fast and easy.
There are two solutions possible:
- make costom shape for TSRE
- use offset pption in auto placement settings. Fast and easy.
#3
Posted 16 June 2018 - 06:30 AM
Hey Goku, I didn't know I could use the Offset option to change the autoplacement position for an object. A lesson learned.
Thank you, is sorted now!
Thank you, is sorted now!
Page 1 of 1