Log In
Register Now!
Help
File Submitter: wellsburg
File Submitted: 24 Apr 2018
File Category: NG Steam Locos
Open Rails 2018-04-24 04-48-41.jpg (349.45K)
Number of downloads: 5
PROTOTYPE
The locomotive was one of about 4700 built by Vulcan Iron Works of Wilkes Barre,Pennsylvania.
These locos were designed for industrial, mining and logging on rough trackage.
This particular 3' narrow gauge 0-4-2 was the smallest of the 0-4-2 series.
MODEL
This model is based on drawings by Ed Gebhardt in the May/June 1993 "Narrow Gauge & Short Line Gazette".
Software used was 3DCrafter 9.3 Build 1620.
The engine is for OR only. Eng file uses format recommended by Peter Newell.
Cab details based on a YouTube video of a Vulcan 0-4-0 being rebuilt in Georgia.
The cab doors open and close with "Q "and "Shift Q".
A rear cab weather curtain for cold weather protection opens and closes with "Shift V".
Couplers are link & pin but do connect with knuckle couplers.
Water intake is at the bell. On prototype, bell was mounted on a hinged plate.
Entire bell/plate swung to the side for water tank access. Model does not swing.
There are two crew sets ( Vulcan-Crew2 and Vulcan-CrewF ) generously provided by Tom Werb.
They can be interchanged by changing the FreightAnim in the .eng file.
Keep in mind, this is a small engine that will work best in yard operations.
CREDITS
Tom Werb aka "Sandy River Tom" for creating the two customized crew sets and providing beta model review.
Rick the Grindre for his beta reviews.
LEGAL
You may package and distribute the Vulcan model only to whomever you wish as long as everyone keeps everything free.
Engineer and fireman shapes and textures ( Vulcan-Crew2 and Vulcan-CrewF ) are provided for this model
and may not be copied, modified and/or transferred to a different model for distribution.
For information on adding "Tom's Crews" to models for distribution, contact Tom Werb ( "Sandy River Tom" ) at ElvasTower.com .
Mike
Click here to download this file