Elvas Tower: Brass ALCO RSD-12 6 axle road Switcher-TSM resource kit - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Brass ALCO RSD-12 6 axle road Switcher-TSM resource kit Rate Topic: -----

#1 User is offline   B & O GUY 

  • Vice President
  • Group: Status: Elite Member
  • Posts: 2,354
  • Joined: 14-May 08
  • Gender:Not Telling
  • Location:New York State
  • Simulator:Open Rails
  • Country:

Posted 22 December 2017 - 12:41 PM

http://www.elvastowe...eenshot&id=2665
File Name: Brass ALCO RSD-12 6 axle road Switcher-TSM resource kit
File Submitter: B & O GUY
File Submitted: 22 Dec 2017
File Category: 3D Modeling Utilites and Source Files

Brass ALCO RSD-12 6 axle road Switcher-TSM resource kit by B & O GUY

Detail's here (http://www.thediesel.../DataRSD12.HTML)
A mediocre locomotive with only 69 domestic unit's sold plus another
131 export's to Mexico, Brazil and India. With the 251B V12 it's
reliability was much better than with the previous 244 engined models.
Still with 200 unit's it wasn't going to lift ALCo and MLW out of it's
slump in the market. The Pennsylvania RR, Southern Pacific and
Chesapeake & Ohio were the largest domestic users at 21, 24 and 10
respectfully.

Credits:
An Orginal Model by Allen Norton "Nortec"-B&O Guy"
Couplers and Air Hoses by "Tim Muir"..

The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs.

No support is offered or will be given. Use the forum for questions.
-----------------------------------------------------------------
Legals:

Have fun and give proper credit.

I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning experience.
--------------------------------------------------------------
Model statistics;
No textures are included with this kit. The coupler and hoses are
another resource kit here in the resource section of the library on
the last page. Included with the kit are the textures for the coupler
and hoses.
Model polygon count-21204
--------------------------------------------------------------------------------
If you need to contact me you may do so here at Elvas Tower.

Thank you
Allen Norton-"B&O Guy"

Click here to download this file

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users