Hello,
In most cabviews i need a display that shows the "idle" position of combined power handle display.
If i have a .eng file where i need "blended" function, the display is not visible if combined power lever is on "idle" and brake with blended is active
if you release the brakes and blended fucntion shutdown, the display is back, and this on 0 km/h.
Also the dynamic brake not shutdown like MSTS do (when fadeout speed is reached). In ORTS the tension go to zero, but al displays of dynamic stay on until brake is released on blended system, or dynamic lever is turn back to
zero position, in MSTS the display working on tension value i think, zero = off, and so it must be.
I hope this can be can fix..
Page 1 of 1
Problem with "blended" active & combined power handle display
Page 1 of 1