Hello,
If i use:
BrakeEquipmentType ( "Distributor,auxilary_reservoir,emergency_brake_reservoir, Handbrake" )
BrakeSystemType ( "EP" )
BrakesEngineBrakeType ( "EP" )
BrakesTrainBrakeType ( "EP" )
BrakesEngineControllers ( "Independent, Train, Hand, Dynamic, Blended" )
The "Blended" function not work :-(
If i use:
BrakeEquipmentType ( "Distributor,auxilary_reservoir,emergency_brake_reservoir, Handbrake" )
BrakeSystemType ( "Air_twin_pipe" )
BrakesEngineBrakeType ( "EP" )
BrakesTrainBrakeType ( "EP" )
BrakesEngineControllers ( "Independent, Train, Hand, Dynamic, Blended" )
Than the "Blended" function work
I dont know if this is a bug or the second .eng file data is the right data for config EP system on a locomotive
In advance thanks,
Stijn
Page 1 of 1
No blended braking with "EP" EP / twinpipe issue
#3
Posted 10 November 2017 - 12:40 PM
Maybe post#13 in this thread will help >>> http://www.elvastowe...ck/page__st__10
See Hamza's post#6 for an example of blended braking an OR engine file.
You may need to add the ORTS Blended parameter for everything to work, the manual has a section about it >> 7.3.4 Blended Dynamic Brake
That's the extent of my knowledge, have not tried using that feature yet.
See Hamza's post#6 for an example of blended braking an OR engine file.
You may need to add the ORTS Blended parameter for everything to work, the manual has a section about it >> 7.3.4 Blended Dynamic Brake
That's the extent of my knowledge, have not tried using that feature yet.
#4
Posted 10 November 2017 - 04:34 PM
I haven't installed the latest OR version as yet, but blended brakes with EP does work on my current OR version of x3963.
Thanks
Thanks
#5
Posted 11 November 2017 - 01:59 PM
Hello,
The 2 Dynamic brake commands of ORTS are still active on that .eng file
Strange is on locomotives with PBL brake script and al settings on "EP" it works.
This locomotive where i have problem have no PBL script need, becauze they have a Oerlikon brakelever.
But change brakelever config solve the problem not too.
The 2 Dynamic brake commands of ORTS are still active on that .eng file
Strange is on locomotives with PBL brake script and al settings on "EP" it works.
This locomotive where i have problem have no PBL script need, becauze they have a Oerlikon brakelever.
But change brakelever config solve the problem not too.
Page 1 of 1