[Ernst]

Hi All

Routes (Nodo di Roma, Napoli Centrale - Roma Termini - Firenze SMN and many others) do not open with OR when used Fs-ETR500FR-45. Those Routes in OR open without any problem with other rolling stock.

Please see attached OpenRailsLog, one *.eng file and Consist used.

Unfortunatly did not find any solution.

Thanks for your help

Ernst

Attached File(s)

•  Fs-ETR500FR-45.con (2.59K)
  Number of downloads: 235
•  OpenRailsLog.txt (30.14K)
  Number of downloads: 278
•  Fs-ETR500FR-45A.eng (24.94K)
  Number of downloads: 247

[longiron]

If you look at where OR is throwing an error reading the eng file, it's in the lighting section. I'm not a lighting expert. but that's where I would look. First step is to remove the whole lighting section and see if OR loads. Yes, then you have confirmation. No, then the error message is a false lead

chris

[Ernst]

 longiron, on 02 October 2017 - 01:00 PM, said:

If you look at where OR is throwing an error reading the eng file, it's in the lighting section. I'm not a lighting expert. but that's where I would look. First step is to remove the whole lighting section and see if OR loads. Yes, then you have confirmation. No, then the error message is a false lead

chris

Sorry. but eliminating lighting section did not work, OR did not load.

Anyway, thanks for your interest.

Ernst

[engmod]

You need to upload the log file from that run!!

[espee]

You have a problem in the cvf files...

Actually back to line 231 in both cvf files

It needs to be something like:

PositiveColour ( 1
ControlColour ( 0 0 0 )
SwitchVal ( 1 )
ControlColour ( 0 0 0 )
)

I don't know the proper switchval but this does get it to work.

You have:
PositiveColour ( 1
trolColour ( 0 0 0 )
)

[Ernst]

 espee, on 02 October 2017 - 09:04 PM, said:

You have a problem in the cvf files...

Actually back to line 231 in both cvf files

It needs to be something like:

PositiveColour ( 1
ControlColour ( 0 0 0 )
SwitchVal ( 1 )
ControlColour ( 0 0 0 )
)

I don't know the proper switchval but this does get it to work.

You have:
PositiveColour ( 1
trolColour ( 0 0 0 )
)

espee

That was the solution.

trolColour was the problem, changing it to ControlColour was all needed. Now the train works perfect.

Thanks

Ernst