The message will not be displayed when the car is disconnected
#11
Posted 18 December 2017 - 09:36 AM
Here there is a .dll file to be replaced into OR x.4010 that should solve the problem. It is based on a patch prepared by mbm_OR. Pls. test this, and if it runs OK I'll upload it.
20/12/17: File deleted because patch committed
20/12/17: File deleted because patch committed
#12
Posted 19 December 2017 - 02:21 AM
Working Fine :)
http://wstaw.org/m/2017/12/19/Nowy_obraz_mapy_bitowej.jpg
http://wstaw.org/m/2017/12/19/Nowy_obraz_mapy_bitowej.jpg
#14
Posted 29 December 2017 - 10:01 AM
#15
Posted 03 January 2018 - 01:34 PM
Hi Icik,
pls. try this file within x.4017/x.4018.
Orts.Simulation.dll.zip (468.04K)
Number of downloads: 260
Patch provided by mbm_OR
pls. try this file within x.4017/x.4018.
Orts.Simulation.dll.zip (468.04K)
Number of downloads: 260
Patch provided by mbm_OR
#16
Posted 04 January 2018 - 07:56 AM
Hello Carlo, thanks for the patch. Train build works, but the message will appear immediately after assembly. He does not wait to disconnect the locomotive.
Can You pls then also make the patch for MG version?
Can You pls then also make the patch for MG version?
#17
Posted 12 January 2018 - 01:30 AM
Hi Icik,
pls. try this file within x.4022.
Regards,
Mauricio
2018/01/13. File deleted
pls. try this file within x.4022.
Regards,
Mauricio
2018/01/13. File deleted
#18
Posted 12 January 2018 - 06:55 AM
Hi mbm_OR,
I try your file, but is not working. Assembly of train in reverse order is now not working and the message is not appear too.
I try your file, but is not working. Assembly of train in reverse order is now not working and the message is not appear too.
#19
Posted 12 January 2018 - 07:06 AM
#20
Posted 12 January 2018 - 07:57 AM
The previous patch saw the job as fulfilled after the train arrived on the wagon and subsequently disconnected the locomotive, but no message was displayed. Now that the train has been parked on decommissioned cars, the task is not fulfilled after disconnecting the locomotive. Of course the train stops completely and then disconnects the locomotive.