Elvas Tower: CG Craftsman house 10 "Cliffton" - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

CG Craftsman house 10 "Cliffton" Rate Topic: -----

#1 User is offline   CrisGer 

  • Member, Board of Directors
  • PipPipPipPipPipPipPipPipPipPip
  • Group: ET Admin
  • Posts: 5,345
  • Joined: 06-October 09
  • Gender:Male
  • Location:Colorado and California
  • Simulator:MSTS OR
  • Country:

Posted 30 July 2017 - 04:29 AM

http://www.elvastowe...eenshot&id=2601
File Name: CG Craftsman house 10 "Cliffton"
File Submitter: CrisGer
File Submitted: 30 Jul 2017
File Category: Buildings

CRAFTSMAN STYLE HOUSE 10
Cliffton Style Gray Wood
Dormer Attic White Trim Offset
Double Pillars

1910

These houses were prefabricated at the factory by a number of companies in the United States between the late 1800s and the mid 1940s. Some of the major catalog companies including Sears carries their own brand of houses as well. the parts were delivered to the construction site numbered and 3 men could build most of these style houses in 300 hours. Many remain and are highly prized by their owners and potential buyers. These models are medium pol and are intended to have both night textures.

Built from historic plans. It shows all of the characteristics of the notable Craftsman style, wide and sweeping eaves, heavy beans supporting a wide spread roof, elegant fenestration and fixtures, and usually either wooden siding or shingle wall treatments. This set contains both individual houses and matching early garages which were also designed as carriage houses and stables.

Most of the houses also have a coal chute, mail box, door bell, and some have other detail features.

More different styles of this series will be made.

This model includes night and snow textures. It is medium poly so can be used for both MSTS and Open Rails.

Rights and Restrictions: you may freely use, rework and repaint this model, TSM source files is included. The only restriction is that this model may not be sold or used in commercial pay ware without my express permission. You can reach me at the e mail below. It may also be converted to Railworks, Trainz or any other sim format I would appreciate notice and a copy of your finished work.

Installation:
Place the shape and texture files into your route folders and add the ref entry to your ref list. I use the 257 texture setting so that this will correctly display both snow and night textures.


Chris Gerlach (CrisGer)
July 2017

chrisgerlach9@yahoo.com

Click here to download this file

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users