[steamer_ctn]

SP 0-6-0, on 07 February 2017 - 05:30 PM, said:

Ok, I found my resources. I hope something is of use?

Thanks for that.

I will study the info, and see if there is anything that I can implement. It might take a while as I have a few other changes on the go.

[SP 0-6-0]

Peter, No worries.

Robert

[steamer_ctn]

I have created a blueprint for steam generator effects, and will start to reflect upon the coding of it (will take a while).

It is not my intention to code a fully working steam generator, instead I will attempt to facilitate some of the visual effects, such as steam leaks, and any features that directly impact upon the performance of trains or rolling stock (eg changes in mass due to fuel or water usage).

[SP 0-6-0]

Peter, Looking forward to it.

I hope someday we can talk about HEP for diesels and the extra load applyed to the main engine for the older passenger diesels.

Robert

[rdamurphy]

steamer_ctn, on 20 February 2017 - 10:50 PM, said:

I have created a blueprint for steam generator effects, and will start to reflect upon the coding of it (will take a while).

It is not my intention to code a fully working steam generator, instead I will attempt to facilitate some of the visual effects, such as steam leaks, and any features that directly impact upon the performance of trains or rolling stock (eg changes in mass due to fuel or water usage).

If all you want is a steam plume that can be placed on the generator exhaust, it would be pretty simple, not much coding involved. Steam pop-off valves would be pretty easy also...

Most of the code is already there for the other effects.

Robert

[steamer_ctn]

rdamurphy, on 20 February 2017 - 11:39 PM, said:

If all you want is a steam plume that can be placed on the generator exhaust, it would be pretty simple, not much coding involved. Steam pop-off valves would be pretty easy also...

Most of the code is already there for the other effects.

Thanks for that.

I am hoping to reuse whatever code that I can.

[copperpen]

If only going for effects, then just need the ability to add steam Fx to cars other than steam locomotives.

[Stijn D.C.]

Hello,

I think, since X3836, al electric trains his ampéreneedles dont work anymore, on X3837 too.

I just report this.


Greetz,

Stijn

[steamer_ctn]

Stijn D.C., on 29 April 2017 - 06:26 AM, said:

I think, since X3836, al electric trains his ampéreneedles dont work anymore, on X3837 too.

Are you able to confirm that the feature was working in #3835 or #3834?

Thanks

[Stijn D.C.]

Hello,

That is the problem, i can not back to X3835

onley backup i have, is for go back to X3829 (there ampereneedles work)


Is there not website, where you can download every X version of ORTS?




Greetz,

Stijn

[steamer_ctn]

Stijn D.C., on 30 April 2017 - 12:35 AM, said:

Is there not website, where you can download every X version of ORTS?

Try here.

[Stijn D.C.]

Hello,

Thanks :-)

I have test, indeed it is since X3836, on X3835 amperéneedles working.

Sorry that i was thinking wrong, with youre link i can work better in that case ;-)


Greetz,

[steamer_ctn]

Stijn D.C., on 30 April 2017 - 01:03 AM, said:

I have test, indeed it is since X3836, on X3835 amperéneedles working.

Is this issue occurring on default diesel locomotive stock?

If so which unit?

Thanks

[Csantucci]

Peter,
you have a PM about this problem.

[Stijn D.C.]

steamer_ctn, on 30 April 2017 - 01:16 AM, said:

Is this issue occurring on default diesel locomotive stock?

If so which unit?

Thanks

Hello,

Do you main the MSTS standard Diesel locomotives? I dont have them anymore, but my cabviews are based on it.

And in this Diesels the AMP needle dont work too: (Piece of cabview.cvf)

Dial (
Type ( AMMETER DIAL )
Position ( 377 333 10 24 )
Graphic ( HLD55TVM-Kameter.ace )
Style ( NEEDLE )
ScaleRange ( 0 3000 )
ScalePos ( 240 130 )
Units ( AMPS )
Pivot ( 19 )
DirIncrease ( 0 )
)

But in 1 of my last cabviews i have use:

Dial (
Type ( LOAD_METER DIAL )
Position ( 321 277 5 19 )
Graphic ( HLD54-AMPERE.ace )
Style ( POINTER )
ScaleRange ( 0 750 )
ScalePos ( 298 65 )
Units ( AMPS )
Pivot ( 28 )
DirIncrease ( 0 )
)

This loadmeter works

Greetz,

Stijn