[dennisat]

Icik, on 22 February 2017 - 08:00 AM, said:

Is not working! When I set another value then 100, I hear nothing.
Pls check this.

I had this problem because, I think, in method "SetFreqAndVolume()" "ExternalSoundPassThruPercent" is an integer and is divided by "100", also by default an integer. I think this would mean that anything other than "100/100" would be 0. I've modified my copy of OR to cast "ExternalSoundPassThruPercent" as float and set the 100 divisor as "100f" and I now get other than 0 or 1 as the volume.

Dennis

[Csantucci]

Sorry, fix committed in x.3804.

[Stijn D.C.]

@ IcIk => I have do testdrive on 100% but on this i hear everyting of outside, i have tested before Carlo's his fix now.



Greetz,

Stijn

[Csantucci]

Manual updated with description of this feature in x.3805.

[Stijn D.C.]

Today i have test on X3804, with value 0 in options, and with value 15 in ENG file, and that value is good for hear the bell of crossing.sms too




Greetz,

Stijn

[Icik]

I have tested and looks good.
Thanks!

[Serana]

For the TCS vigilance monitor alarm during the emergency state, it should be fixed in revision 3807.

[Stijn D.C.]

Hello,

X3807 is instal and i have test it.

Sound is ok now, But they are little details:

• Sound stops not by press RESETkey , only after set the reverser in neutral & after pres RESETkey

My Vigalancemonitor is config like this:

VigilanceMonitor (
MonitoringDeviceMonitorTimeLimit ( 60 )
MonitoringDeviceAlarmTimeLimit ( 56 )
MonitoringDevicePenaltyTimeLimit ( 0 )
MonitoringDeviceCriticalLevel ( 0 )
MonitoringDeviceResetLevel ( 0 )
MonitoringDeviceAppliesFullBrake ( 1 ) => works like Emergencybrake for moment, if you choose this in MSTS and you reset alerteremergency, the brake release directly (not after stop)
MonitoringDeviceAppliesEmergencyBrake ( 1 ) => works.
MonitoringDeviceAppliesCutsPower ( 1 )
MonitoringDeviceAppliesShutsDownEngine ( 1 ) => works fine, circuitbreaker go open
MonitoringDeviceResetOnResetButton( 1 ) => Works
MonitoringDeviceResetOnDirectionNeutral ( 1 ) => Works, but timerproblem
MonitoringDeviceResetOnZeroSpeed ( 0 ) => Works
)

In MSTS if you set like this:

MonitoringDeviceAppliesFullBrake ( 1 )
MonitoringDeviceAppliesEmergencyBrake ( 0 )

And the Alerter go in emergency, and you press RESET, the emergencystep is directly stopped.

If you set:

MonitoringDeviceAppliesFullBrake ( 1 )
MonitoringDeviceAppliesEmergencyBrake ( 1 )

You can only reset if you are @ zero speed, and after penalty time.


It is not a soundrelatedproblem this i think, if sound stops after reset key it is ok for me.

The other problem can be fix that alerteremergencyprocedure reset after resetkey , not at zero speed and reverser neutral.


With the alertertimer there is a little issue too, if you push reset or the reverser stay on neutral, the timer must be reset, and stay reset on the time that is given in

MonitoringDeviceAlarmTimeLimit ( 56 ) Like in MSTS.

Example: if you start the game, and you power on the train slowley, becauze you have time.... and it is time to depart, and you set the reverser in forward/backward, the alerter go directly, becauze timer is on start of game loops. In MSTS the timer stay on hold on neutral reverser, or like German & French trains reset on 0km/h

In advance thanks,

Stijn