Hello,
I use the ETCS speed gauche, bud for a train i need a ETCS gauche from zero to 200kmh
Bud that scalerange is not avaible, onley 0-180 & 0-240
I need the one on picture in attachment :blush2:
In advance thanks
Page 1 of 1
ETCS Gauche Scale range I need 0 to 200 km/h
#2
Posted 29 August 2016 - 06:36 AM
Hello,
Seems like we have there another unofficiel speed scale (not defined in the ETCS DMI specification).
Seems like we have there another unofficiel speed scale (not defined in the ETCS DMI specification).
#3
Posted 31 August 2016 - 04:02 PM
Hello,
This is from a Siemens Desiro ML (SNCB Belgium) EMU. i gonna see for pics or information of al ETCS scales we have in Belgium for this moment. for Thalys PBKA i have no problems (same like TGV POS), my Thalys PBKA cabview is with photoshop trick made for POS & Euroduplex too.
Can other scaleranges like this be add too?
The orangje overspeed work on some scalranges, bud for range 400 i have not see, bud that trains works with France.tcs too.
This is from a Siemens Desiro ML (SNCB Belgium) EMU. i gonna see for pics or information of al ETCS scales we have in Belgium for this moment. for Thalys PBKA i have no problems (same like TGV POS), my Thalys PBKA cabview is with photoshop trick made for POS & Euroduplex too.
Can other scaleranges like this be add too?
The orangje overspeed work on some scalranges, bud for range 400 i have not see, bud that trains works with France.tcs too.
#4
Posted 03 September 2016 - 11:31 AM
I have added only standard ranges defined in ETCS DMI spec. (140, 180, 250, 400), plus two non-standard but used one: 240, 260. I think 200 can be easily added too. It would be good to know what other non-standard ranges are used in the world.
#5
Posted 10 July 2020 - 06:22 AM
Hello,
I have change the scaleranges for km/h to:
readonly int[] StandardScalesKMpH = new int[] { 140, 160, 180, 200, 240, 250, 260, 300, 320, 400 };
Now i get more scaleranges that are match with real :-)
But i have now other problem.
When i use this in .eng files:
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
or
MonitoringDeviceAppliesFullBrake( 1 )
MonitoringDeviceAppliesEmergencyBrake( 0 )
The ETCS gauche when there is overspeed is RED.
With:
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 0 )
I have ORANGE overspeed needle
Is there no solution for have ORANGE speed needle on MonitoringDeviceAppliesEmergencyBrake( 1 ) and when the alarmtimelimit is reached ( XX seconds ORGANGE) that after this, color change to RED?
MonitoringDeviceMonitorTimeLimit( 10 )
MonitoringDeviceAlarmTimeLimit( 14 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 220 )
In advance thanks,
Stijn
I have change the scaleranges for km/h to:
readonly int[] StandardScalesKMpH = new int[] { 140, 160, 180, 200, 240, 250, 260, 300, 320, 400 };
Now i get more scaleranges that are match with real :-)
But i have now other problem.
When i use this in .eng files:
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 1 )
or
MonitoringDeviceAppliesFullBrake( 1 )
MonitoringDeviceAppliesEmergencyBrake( 0 )
The ETCS gauche when there is overspeed is RED.
With:
MonitoringDeviceAppliesFullBrake( 0 )
MonitoringDeviceAppliesEmergencyBrake( 0 )
I have ORANGE overspeed needle
Is there no solution for have ORANGE speed needle on MonitoringDeviceAppliesEmergencyBrake( 1 ) and when the alarmtimelimit is reached ( XX seconds ORGANGE) that after this, color change to RED?
MonitoringDeviceMonitorTimeLimit( 10 )
MonitoringDeviceAlarmTimeLimit( 14 )
MonitoringDevicePenaltyTimeLimit( 0 )
MonitoringDeviceCriticalLevel( 220 )
In advance thanks,
Stijn
Page 1 of 1