[Fablok]

On scenic sub I have something like this. Normally I drive the train but suddenly light from green goes to red and Node is Max distance.I pass this red. speed then is 20 mph and node is still max distance. Next semaphore is green. When I arrive to destination and I uncouple cars I have something like this. 2 screens below.

http://wstaw.org/m/2015/09/01/Nowy_obraz_mapy_bitowej.jpg

http://wstaw.org/m/2015/09/01/Nowy_obraz_mapy_bitow1ej.jpg

[Fablok]

Any chance to fix it ? :(

[Fablok]

In other activity when I click to uncouple cars i have same error. This time without red light issue. This is Scenic Subdivision

http://wstaw.org/m/2015/09/04/Nowy_obraz_mapy_3bitowej.jpg

[Csantucci]

I don't think I'm able to solve this, as I don't know that part of the code. Can you open a bug report in Launchpad and attach the logfile? Does this occur you also in other routes when you uncouple wagons? Were you on an optional path when you uncoupled the wagons?

[Fablok]

This is revision 3231.On newer I have error but I wrote this in other topic. Here screen just before uncoupling and log file in attach. Earlier eveything was working fine. I don't know what goes wrong. Paths are OK.

http://wstaw.org/m/2015/09/04/Nowy_obraz_mapy_bitowej.jpg

[Csantucci]

When you say that "Earlier eveything was working fine", do you mean that with earlier versions you did not have the crash shown in this post? If yes, can you find out since what version the problem started?

[Fablok]

Last time without errors was version 3120 for first error and 3133 for second. It was many updates ago :\

EDIT:

I see that sombady else have also problem with coupling cars.https://bugs.launchpad.net/or/+bug/1492064

[Csantucci]

The bug report you mention is generated by another reason. I have provided a tentative solution for it.
Is it 3120 or 3220? What is the first error for you and what is the second error?

[edwardk]

Is this a custom activity or a default activity? Since I also have the Scenic Sub, I can check to see if I can trigger the same error. Its also important to know that the error in this situation is the uncoupling of the car? I indicated this as a question because the other issue included the signal.

Edward K.

[Fablok]

In 3231 I have both errors. Those 2 other versions was last versions when I have to play without error. Red light issue was in Weentache Local part 1 after passing with other train. Uncoupling error is in Delicate cagro activity when You need to uncouple cars to Boeing plant.You can check this delicate cargo. Run on autopilot till point of drop and You will see what happens. Of course now You must test it on 3231 becouse on newer version route have loading error.