[That Genset Foamer]

http://www.elvastowe...eenshot&id=1931
File Name: RACO Signaling Mega-Pack
File Submitter: That Genset Foamer
File Submitted: 21 Sep 2014
File Category: Signals & Signs

A kit for RACO crossing signals, a common West-Coast setup derived installed between the 1950s and 1980s on many secondary Santa Fe and Southern Pacific lines. Included are GS-class Hydraulic Mechanisms, Truss Cantilevers, three variants of 8x20 RACO flashers, crossbuck signs, bell shapes, and "combination" cantilevers. This pack is intended to be nearly standalone, although it can be used with Patrick Lopez's lights, bells, and signs as well as other sets. The only missing component are track signs, which can be picked up from RXRsignals.

Gates come in the following variants:
18': High & Low Masts
24': High & Low Masts

Cantilevers come with "combination" variants of any length from 12 to 28 feet (3 to 7 Panels) in 4-foot increments. All gates are equipped with GS-class Gate Mechanisms and Adapters, aluminum gate arms, 5" diameter masts, and 4" gate lights. See readme for more details.

Click here to download this file

[frankwill]

Msts crossing signal fix

This post has been edited by frankwill: 27 July 2015 - 07:35 AM