3D Cabs
#611
Posted 11 June 2020 - 11:17 PM
Vapor3D, if you want to make available to me your work, I may have a look at what is going wrong in the code, but I can't promise results.
#612
Posted 18 June 2020 - 09:47 AM
Thanks Ccantucci.
This is the actual code for my cab3D:
In any case, I already say that by blocking the controls that are between Comment(), everything works fine.
What is lost is the remote possibility of animating the leds of the digital speedometer. I tried a lot of things but none of them worked, so I left everything on for now...
This is the actual code for my cab3D:
SIMISA@@@@@@@@@@JINX0h0t______ Tr_CabViewFile ( CabViewType ( 1 ) CabViewFile ( "MMS6000front.ace" ) CabViewWindow ( 0 0 640 480 ) CabViewWindowFile ( "MMS6000front.ace" ) Position ( 0 2.4 8.13 ) Direction ( -1 0 0 ) CabViewFile ( "MMS6000left.ace" ) CabViewWindow ( 0 0 640 480 ) CabViewWindowFile ( "MMS6000left.ace" ) Position ( 1 2.4 11.3 ) Direction ( -5 -60 0 ) CabViewFile ( "MMS6000right.ace" ) CabViewWindow ( 0 0 640 480 ) CabViewWindowFile ( "MMS6000right.ace" ) Position ( 0 2.4 11.3 ) Direction ( -1 40 0 ) EngineData ( MMS6000 ) CabViewControls ( 21 MultiStateDisplay ( Type ( OVERSPEED MULTI_STATE_DISPLAY ) Position ( 254 323 20 10 ) Graphic ( "MMS6000frenos.ace" ) States ( 2 2 1 State ( Style ( 0 ) SwitchVal ( 0 ) ) State ( Style ( 0 ) SwitchVal ( 1 ) ) ) ) MultiStateDisplay ( Type ( ALERTER_DISPLAY MULTI_STATE_DISPLAY ) Position ( 290 332 20 10 ) Graphic ( "MMS6000hombremuerto.ace" ) States ( 2 2 1 State ( Style ( 0 ) SwitchVal ( 0 ) ) State ( Style ( 0 ) SwitchVal ( 1 ) ) ) ) MultiStateDisplay ( Type ( DYNAMIC_BRAKE_DISPLAY MULTI_STATE_DISPLAY ) Position ( 309 323 20 10 ) Graphic ( "MMS6000frenos.ace" ) States ( 2 2 1 State ( Style ( 0 ) SwitchVal ( 0 ) ) State ( Style ( 0 ) SwitchVal ( 1 ) ) ) ) TwoState ( Type ( ORTS_RIGHTDOOR TWO_STATE ) Position (355 382 44 12) Graphic ( "MMS6000doors.ace" ) NumFrames ( 2 1 2 ) Style ( ONOFF ) MouseControl ( 1 ) ) TwoState ( Type ( ORTS_LEFTDOOR TWO_STATE ) Position (249 382 44 12) Graphic ( "MMS6000doors.ace" ) NumFrames ( 2 1 2 ) Style ( ONOFF ) MouseControl ( 1 ) ) TwoState ( Type ( ORTS_CABLIGHT TWO_STATE ) Position ( 374 437 10 11 ) Graphic ( "MMS6000faros.ace" ) NumFrames ( 2 2 1 ) Style ( PRESSED ) MouseControl ( 1 ) ) Comment ( Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 356 361 6 5 ) Area ( 0 0 6 5 ) Graphic ( "MMS6000verde1.ace" ) Style ( SOLID ) ScaleRange ( 5 5 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 352 359 5 4 ) Area ( 0 0 5 4 ) Graphic ( "MMS6000verde2.ace" ) Style ( SOLID ) ScaleRange ( 10 10 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 349 356 5 5 ) Area ( 0 0 5 5 ) Graphic ( "MMS6000verde3.ace" ) Style ( SOLID ) ScaleRange ( 15 15 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 347 352 4 6 ) Area ( 0 0 4 6 ) Graphic ( "MMS6000verde4.ace" ) Style ( SOLID ) ScaleRange ( 20 20 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 346 348 5 5 ) Area ( 0 0 5 5 ) Graphic ( "MMS6000verde5.ace" ) Style ( SOLID ) ScaleRange ( 25 25 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 346 344 3 5 ) Area ( 0 0 3 5 ) Graphic ( "MMS6000verde6.ace" ) Style ( SOLID ) ScaleRange ( 30 30 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 170 255 45 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 346 338 4 6 ) Area ( 0 0 4 6 ) Graphic ( "MMS6000verde7.ace" ) Style ( SOLID ) ScaleRange ( 35 35 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 347 335 5 5 ) Area ( 0 0 5 5 ) Graphic ( "MMS6000verde8.ace" ) Style ( SOLID ) ScaleRange ( 40 40 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 350 331 4 6 ) Area ( 0 0 4 6 ) Graphic ( "MMS6000verde9.ace" ) Style ( SOLID ) ScaleRange ( 45 45 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 352 329 6 4 ) Area ( 0 0 6 4 ) Graphic ( "MMS6000verde10.ace" ) Style ( SOLID ) ScaleRange ( 50 50 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 356 327 6 4 ) Area ( 0 0 6 4 ) Graphic ( "MMS6000verde11.ace" ) Style ( SOLID ) ScaleRange ( 55 55 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 170 255 45 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 360 326 6 4 ) Area ( 0 0 6 4 ) Graphic ( "MMS6000verde12.ace" ) Style ( SOLID ) ScaleRange ( 60 60 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 365 326 6 4 ) Area ( 0 0 6 4 ) Graphic ( "MMS6000verde13.ace" ) Style ( SOLID ) ScaleRange ( 65 65 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 370 327 4 2 ) Area ( 0 0 4 2 ) Graphic ( "MMS6000verde14.ace" ) Style ( SOLID ) ScaleRange ( 70 70 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 375 329 6 4 ) Area ( 0 0 6 4 ) Graphic ( "MMS6000verde15.ace" ) Style ( SOLID ) ScaleRange ( 75 75 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 378 331 4 6 ) Area ( 0 0 4 6 ) Graphic ( "MMS6000verde16.ace" ) Style ( SOLID ) ScaleRange ( 80 80 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 170 255 45 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 380 335 5 5 ) Area ( 0 0 5 5 ) Graphic ( "MMS6000verde17.ace" ) Style ( SOLID ) ScaleRange ( 85 85 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 382 338 4 6 ) Area ( 0 0 4 6 ) Graphic ( "MMS6000verde18.ace" ) Style ( SOLID ) ScaleRange ( 90 90 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 383 344 3 5 ) Area ( 0 0 3 5 ) Graphic ( "MMS6000verde19.ace" ) Style ( SOLID ) ScaleRange ( 95 95 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 382 348 4 5 ) Area ( 0 0 4 5 ) Graphic ( "MMS6000verde20.ace" ) Style ( SOLID ) ScaleRange ( 100 100 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 381 352 4 6 ) Area ( 0 0 6 7 ) Graphic ( "MMS6000verde21.ace" ) Style ( SOLID ) ScaleRange ( 105 105 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 170 255 45 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 377 356 5 5 ) Area ( 0 0 5 5 ) Graphic ( "MMS6000verde22.ace" ) Style ( SOLID ) ScaleRange ( 110 110 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 374 359 5 4 ) Area ( 0 0 5 4 ) Graphic ( "MMS6000verde23.ace" ) Style ( SOLID ) ScaleRange ( 115 115 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) Gauge ( Type ( SPEEDOMETER GAUGE ) Position ( 369 361 6 5 ) Area ( 0 0 6 5 ) Graphic ( "MMS6000verde24.ace" ) Style ( SOLID ) ScaleRange ( 120 120 ) ZeroPos ( 0 ) PositiveColour ( 1 ControlColour ( 255 189 85 ) ) NegativeColour ( 1 ControlColour ( 255 0 0 ) ) Orientation ( 1 ) DirIncrease ( 1 ) Units ( KM_PER_HOUR ) ) ) Digital ( Type ( SPEEDOMETER DIGITAL ) Position ( 165 316 30 16 ) ScaleRange ( 0 120 ) Accuracy ( 0 ) AccuracySwitch ( 0 ) LeadingZeros ( 0 ) Justification ( 2 ) PositiveColour ( 1 ControlColour ( 255 255 0 ) ) NegativeColour ( 0 ) DecreaseColour ( 0 ) Units ( KM_PER_HOUR ) ORTSFont ( 8 1 "alarm clock" ) ) TwoState ( Type ( HORN TWO_STATE ) Position ( 319 383 11 12 ) Graphic ( "MMS6000silbato.ace" ) NumFrames ( 2 2 1 ) Style ( PRESSED ) MouseControl ( 1 ) ) Dial ( Type ( TRACTION_BRAKING DIAL ) Position ( 401 4 2 13 ) Graphic ( "MMS6000agujamps.ace" ) Style ( NEEDLE ) ScaleRange ( -100 100 ) ScalePos ( -120 120 ) Units ( KILO_NEWTONS ) Pivot ( 14 ) DirIncrease ( 0 ) ) Dial ( Type ( AMMETER DIAL ) Position ( 329 4 2 13 ) Graphic ( "MMS6000agujamps.ace" ) Style ( NEEDLE ) ScaleRange ( -800 800 ) ScalePos ( -115 115 ) Pivot ( 14 ) DirIncrease ( 0 ) Units ( AMPS ) ) Dial ( Type ( LINE_VOLTAGE DIAL ) Position ( 275 6 2 20 ) Graphic ( "MMS6000agujavolts.ace" ) Style ( NEEDLE ) ScaleRange ( 0 1500 ) ScalePos ( 270 0 ) Pivot ( 20 ) DirIncrease ( 0 ) Units ( VOLTS ) ) TriState ( Type ( DIRECTION TRI_STATE ) Position ( 69 400 70 60 ) Graphic ( "MMS6000inversor.ace" ) NumFrames ( 3 3 1 ) Style ( NONE ) MouseControl ( 1 ) Orientation ( 1 ) DirIncrease ( 1 ) ) TriState ( Type ( FRONT_HLIGHT TRI_STATE ) Position ( 282 405 10 11 ) Graphic ( "MMS6000faros.ace" ) NumFrames ( 2 2 1 ) Style ( PRESSED ) MouseControl ( 1 ) ) TwoState ( Type ( EMERGENCY_BRAKE TWO_STATE ) Position ( 0 424 68 42 ) Graphic ( "MMS6000emergencia.ace" ) NumFrames ( 2 2 1 ) Style ( ONOFF ) MouseControl ( 1 ) ) Dial ( Type ( MAIN_RES DIAL ) Position ( 594 357 3 20 ) Graphic ( "MMS6000agujaroja.ace" ) Style ( NEEDLE ) ScaleRange ( 0 1200 ) ScalePos ( 212 148 ) Units ( KILOPASCALS ) Pivot ( 14 ) DirIncrease ( 0 ) ) Dial ( Type ( BRAKE_CYL DIAL ) Position ( 594 357 3 20 ) Graphic ( "MMS6000agujablanca.ace" ) Style ( NEEDLE ) ScaleRange ( 0 1200 ) ScalePos ( 212 148 ) Units ( KILOPASCALS ) Pivot ( 14 ) DirIncrease ( 0 ) ) TwoState ( Type ( PANTOGRAPH TWO_STATE ) Position ( 265 41 15 21 ) Graphic ( "MMS6000pantografo.ace" ) NumFrames ( 2 2 1 ) Style ( PRESSED ) MouseControl ( 1 ) ) CombinedControl ( Type ( CP_HANDLE COMBINED_CONTROL ) Position ( 495 395 192 234 ) Graphic ( "MMS6000regulador.ace" ) Style ( NONE ) MouseControl ( 1 ) NumFrames ( 9 3 3 ) NumPositions ( 9 0 1 2 3 4 5 6 7 8 ) NumValues ( 9 0 0.1 0.2 0.3 0.4 0.5 0.6 0.75 0.9 ) Orientation ( 0 ) DirIncrease ( 0 ) ) TwoState ( Type ( WIPERS TWO_STATE ) Position ( 244 401 36 18 ) Graphic ( "MMS6000limpias.ace" ) NumFrames ( 2 2 1 ) Style ( ONOFF ) MouseControl ( 1 ) ) TwoState ( Type ( SANDERS TWO_STATE ) Position ( 575 334 28 13 ) Graphic ( "MMS6000arenero.ace" ) NumFrames ( 2 2 1 ) Style ( ONOFF ) MouseControl ( 1 ) ) TwoState ( Type ( RESET TWO_STATE ) Position ( 390 405 10 11 ) Graphic ( "MMS6000silbato.ace" ) NumFrames ( 2 2 1 ) Style ( PRESSED ) MouseControl ( 1 ) ) ) )
In any case, I already say that by blocking the controls that are between Comment(), everything works fine.
What is lost is the remote possibility of animating the leds of the digital speedometer. I tried a lot of things but none of them worked, so I left everything on for now...
#613
Posted 18 June 2020 - 10:43 AM
Hi,
I need also the .s file of the 3D cab and the .eng file of the engine.
I need also the .s file of the 3D cab and the .eng file of the engine.
#614
Posted 20 June 2020 - 01:20 PM
#615
Posted 20 June 2020 - 02:27 PM
mrmosky, on 05 April 2020 - 10:00 AM, said:
There is always a way to do it - even if TSM won't help.
SPEEDO.JPG
In the .s file for the cab, search for SPEEDOMETER, and you should find an entry which looks like this
matrix SPEEDOMETER:0:20 ( 1 0 0 0 1 0 0 0 1 -0.764 2.763 -2.638 )
I wondered whether the first sets of numbers were defining the rotation of the origin, as they were all the same in my TSM made model.
So I played around with the numbers until I got a result. This worked for me. You may need to play around some more to get the right angle.
matrix SPEEDOMETER:0:30 ( 1 0 0 0 1 0.764 2.763 -2.638 1 -0.764 2.763 -2.638 )
I started off by putting the speedometer object at the angle I wanted it to display (about 30 degrees) . then I copied the numbers from the last set of four to the middle set of four. That changed the angle, but it was inverted. So I rotated the speedometer object again to 150 degrees. Then copied the numbers again.
geoff
SPEEDO.JPG
In the .s file for the cab, search for SPEEDOMETER, and you should find an entry which looks like this
matrix SPEEDOMETER:0:20 ( 1 0 0 0 1 0 0 0 1 -0.764 2.763 -2.638 )
I wondered whether the first sets of numbers were defining the rotation of the origin, as they were all the same in my TSM made model.
So I played around with the numbers until I got a result. This worked for me. You may need to play around some more to get the right angle.
matrix SPEEDOMETER:0:30 ( 1 0 0 0 1 0.764 2.763 -2.638 1 -0.764 2.763 -2.638 )
I started off by putting the speedometer object at the angle I wanted it to display (about 30 degrees) . then I copied the numbers from the last set of four to the middle set of four. That changed the angle, but it was inverted. So I rotated the speedometer object again to 150 degrees. Then copied the numbers again.
geoff
Returning to this, although this method worked for me in my first 3d cab, not so in the second one, maybe because it is another digital control, in this case SPEEDOMETER.
Well, I was making some tests in the decompressed .s file, and I have found the one that has worked for me.
This action causes a deformation in the object SPEEDOMETER, that in my case was a perfect cube and it has become a kind of rhomboidal pyramid, but at the same time it has inclined the numbers related to the file speed.ace at an angle of approximately the tilt of the panel.
The original code:
matrix SPEEDOMETER:0:20 ( 1 0 0 0 1 0 0 0 1 -0.269 2.31 8.22 )
The retouched code:
matrix SPEEDOMETER:0:20 ( 1 0 0 0 1 0.30 0 0 1 -0.269 2.31 8.22 )
The result in Open Rails:
I hope it will be useful to help solve the issue at last!
#616
Posted 21 June 2020 - 12:35 AM
VAPOR3D, on 20 June 2020 - 01:20 PM, said:
Thank you Csantucci, you have a private message with those files.
When you write SPEEDOMETER:m:n in the .s file, m refers to the m+1th occurrence of a SPEEDOMETER control in the .cvf file. So, if you put m=0, this means that you are referring to the first occurrence of a SPEEDOMETER control. If, like in your case, you have 24 SPEEDOMETER occurrences before the SPEEDOMETER DIGITAL occurrence, in the .s file you have to refer to it with SPEEDOMETER:24:20 (both as matrix name and in the animation). If you do so, the SPEEDOMETER DIGITAL becomes visible.
So there is no OR issue here :)
#617
Posted 28 June 2020 - 03:38 AM
Csantucci, on 21 June 2020 - 12:35 AM, said:
When you write SPEEDOMETER:m:n in the .s file, m refers to the m+1th occurrence of a SPEEDOMETER control in the .cvf file. So, if you put m=0, this means that you are referring to the first occurrence of a SPEEDOMETER control. If, like in your case, you have 24 SPEEDOMETER occurrences before the SPEEDOMETER DIGITAL occurrence, in the .s file you have to refer to it with SPEEDOMETER:24:20 (both as matrix name and in the animation). If you do so, the SPEEDOMETER DIGITAL becomes visible.
So there is no OR issue here :)
So there is no OR issue here :)
All right, thank you very much Csantucci!
#618
Posted 05 August 2020 - 04:51 PM
I would like to propose a change for cabview keyboard assignment.
Currently :
- Pushing 1 selects the 2D cab
- Pushing Alt + 1 selects the 3D cab
It is really annoying to enter the 2D cabinstead of the 3D cab when pushing 1.
I would like to propose this :
- Pushing 1 selects the currently selected cab (2D or 3D)
- Pushing Alt + 1 toggles between 2D and 3D cab
Currently :
- Pushing 1 selects the 2D cab
- Pushing Alt + 1 selects the 3D cab
It is really annoying to enter the 2D cabinstead of the 3D cab when pushing 1.
I would like to propose this :
- Pushing 1 selects the currently selected cab (2D or 3D)
- Pushing Alt + 1 toggles between 2D and 3D cab