Elvas Tower: OR Crashes - Elvas Tower

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

OR Crashes Rate Topic: -----

#1 User is offline   steamer_ctn 

  • Open Rails Developer
  • Group: Status: Elite Member
  • Posts: 1,889
  • Joined: 24-June 11
  • Gender:Male
  • Country:

Posted 03 February 2014 - 10:34 PM

Hi,

Up until #1978 (or thereabouts) I have been able to load a special test route, stock and consists that worked ok, even though they were not without errors.

Since 1978 I have experienced problems loading them.

I have also tried loading a default MSTS route with the Flying Scotman, but get similar results.

I am running in explorer mode.

I have attached two log files for reference. One is the default S&C route & rolling stock.

The other is my test stock which has been running ok up until recently.

Any suggestions as to what might be causing the error and how I fix it?

Thanks

Peter

Attached File(s)


#2 User is offline   Weichenpfleger 

  • Apprentice
  • Group: Status: Dispatcher
  • Posts: 14
  • Joined: 31-August 12
  • Simulator:MSTS; OR
  • Country:

Posted 04 February 2014 - 03:21 AM

Since the Rev. X1985 can start I crashed OpenRails with.
The Rev. X1984 runs without problems.
I attach the log file X1993.

Greeting

Weichenpfleger

Attached File(s)


#3 User is offline   JeroenP 

  • Fireman
  • Group: Status: Active Member
  • Posts: 179
  • Joined: 28-December 13
  • Gender:Male
  • Simulator:ORTS
  • Country:

Posted 04 February 2014 - 01:08 PM

Dear all,
I found no issues in running the flying scottsman with X1995. I am not sure whether the small update did it, or whether something else is different.
Jeroen

#4 User is offline   steamer_ctn 

  • Open Rails Developer
  • Group: Status: Elite Member
  • Posts: 1,889
  • Joined: 24-June 11
  • Gender:Male
  • Country:

Posted 04 February 2014 - 10:16 PM

View PostJeroenP, on 04 February 2014 - 01:08 PM, said:

Dear all,
I found no issues in running the flying scottsman with X1995. I am not sure whether the small update did it, or whether something else is different.
Jeroen

It appears that with #2001, OR can now open.

Thanks for that.

#5 Inactive_SweetErin_*

  • Group: Status: Passengers (Obsolete)

Posted 05 February 2014 - 12:01 AM

I had a seperate issue on the Modern City Tramway route, where it loops around, and comes back past itself on a seperate track, it was working fine until about 3/4 of the way past the train, when cars stopped loading, and then OR crashed. also, there was a section of cars that were flying everywhere, and not being visibly on the track. i don't know if my Log will help much with the flying bit, but, maybe the other bit though.

Attached File(s)
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users