Log In
Register Now!
Help
http://www.elvastowe...eenshot&id=1725
File Name: California Western Route
File Submitter: Master Chief
File Submitted: 06 Dec 2013
File Category: Routes
The California Western Railroad runs 40 miles from Ft. Bragg, CA to Willits, CA. Originally built to carry lumber, the line today is mainly a tourist railroad which also provides transportation and mail service to the remote areas traversed by the line.
File 6 of 6.
Route by Jeff Farquhar.
Click here to download this file
Page 1 of 1
California Western Route
Rate Topic:
#1
- Fireman
-
- Group: Status: Active Member
- Posts: 109
- Joined: 09-July 09
- Gender:Male
- Location:San Diego, CA
- Simulator:MSTS
-
Country:
Posted 06 December 2013 - 07:55 PM
#2
- Fireman
-
- Group: Status: Active Member
- Posts: 109
- Joined: 09-July 09
- Gender:Male
- Location:San Diego, CA
- Simulator:MSTS
-
Country:
Posted 06 December 2013 - 08:14 PM
It just dawned on me that I failed to put my email address in the readme file.
Feel free to contact me at jefffarq at gmail.com.
Feel free to contact me at jefffarq at gmail.com.
#3
- Conductor
-
- Group: Status: Contributing Member
- Posts: 491
- Joined: 26-May 06
- Gender:Male
- Location:UK
- Simulator:ORTS
-
Country:
Posted 07 December 2013 - 06:11 AM
Thanks for all the hard work, nice to see what is beyond summit tunnel at last, its scary and i should not have taken 2 geeps and 10 bulkead flats full of logs down that bit.
you need newroads and X-tracks and the tsection #38 they install to make it work, i looked for a readme on what was needed but could not find one, apologies if it is there and i missed it.
you need newroads and X-tracks and the tsection #38 they install to make it work, i looked for a readme on what was needed but could not find one, apologies if it is there and i missed it.
#4
- Executive Vice President
-
- Group: ET Admin
- Posts: 4,862
- Joined: 07-February 13
- Gender:Male
- Location:Leoben, Styria, Austria, Europe
- Simulator:ORTS / MSTS
-
Country:
Posted 07 December 2013 - 06:21 AM
Specifically Tsection.dat 38 or will any higher one do too?
Cheers, Markus
Cheers, Markus
#5
- Fireman
-
- Group: Status: Active Member
- Posts: 109
- Joined: 09-July 09
- Gender:Male
- Location:San Diego, CA
- Simulator:MSTS
-
Country:
Posted 07 December 2013 - 07:28 AM
Tsection.dat 38 or higher should work fine.
I see that I failed to include the readme file, but not for lack of trying. I did add it on with the first file, but it seems I didn't notice that we're not allowed to upload .txt files.
A zipped readme file for the route has been uploaded.
Sorry about that,
I see that I failed to include the readme file, but not for lack of trying. I did add it on with the first file, but it seems I didn't notice that we're not allowed to upload .txt files.
A zipped readme file for the route has been uploaded.
Sorry about that,
#6
- Vice President
-
- Group: Status: Elite Member
- Posts: 2,521
- Joined: 21-August 08
- Gender:Male
- Location:Tujunga, Calif
- Simulator:msts
-
Country:
Posted 07 December 2013 - 09:54 AM
I got it up and running without the readme :oldstry: . I only had to scrounge to find the default cars I deleted years ago :derisive:
Page 1 of 1