Elvas Tower: Michigan Central Box Car 1912 2.0 - Elvas Tower

Jump to content

No uploading is allowed here by anyone. That includes screenshots or other images. Any screenshot or image desired in any post must be hotlinked from an image hosting site(Photobucket, etc,) or existing topic in the main discussion forums.
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Michigan Central Box Car 1912 2.0 Rate Topic: -----

#1 User is offline   CrisGer 

  • Member, Board of Directors
  • PipPipPipPipPipPipPipPipPipPip
  • Group: ET Admin
  • Posts: 5,356
  • Joined: 06-October 09
  • Gender:Male
  • Location:Colorado and California
  • Simulator:MSTS OR
  • Country:

Posted 04 November 2012 - 04:45 PM

http://www.elvastowe...eenshot&id=1523
File Name: Michigan Central Box Car 1912 2.0
File Submitter: CrisGer
File Submitted: 05 Nov 2012
File Updated: 05 Nov 2012
File Category: Box Cars Std Gauge

Michigan Central Railroad Single Sheathed Box Car 2.0
circa 1912
London and Port Stanley RR Route Stock
-------------------------------------------------------------------
FIXED errors
Change Log: Tim Muir fixed some errors i made in the first version, this is the corrected one and should load correctly now. sorry about that. 11-04-12 CSG

Original Car by Tim Muir
Authorized Re-texture by C Gerlach

This is a typical single Sheathed utility box car as used on the Michigan Central RR, intended for use on a steam era version of the London and Port Stanley RR, prior to 1914. The MCRR had leasing rights to run steam equipment on the L&PS and so their stock was found there as well. Tim Muir has very graciously permitted me to do a retexture of his original car as there are very few MCRR cars available for MSTS until now. Tim also found and fixed some errors in the first uploaded version, which was very kind of him.

Tim's Original info read:

Maryland & Pennsylvania RR 40-TON,40-ft Single-Sheathed Boxcar XM #1153 by timmuir Icon

I based it off of the CB&Q X-28 single-sheathed boxcar model made in October of 2005. Much was done to make it over to the M&Pa car, the most noticeable being the heavy truss-work Z-bar side-bracing of the X28 has been replaced with a some-what lighter construction side bracing found on the M&Pa single-sheathed 1100 cars. Also, the X28's Andrews trucks were replaced with Diamond arch-bar frames. Other less noticeable details such as ladders, roof mats and supports, grabs and a couple of tiny things were also changed.

Original File Name = M&Pa_SS_1153.zip

No commercial use is permitted for this model and the user assumes all responsiblity for its use on their system. No further changes may be made for this model without the permission of Tim Muir.


C Gerlach
October 2012
chrisgerlach9@yahoo.com

Click here to download this file
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users