[espee]

http://www.elvastowe...eenshot&id=1039
File Name: Union Pacific H10-44 Reskin Kit
File Submitter: espee
File Submitted: 08 Jul 2010
File Updated: 08 Jul 2010
File Category: Early Diesels (Pre - 1960)

MSTS

July 2010

Union Pacific H10-44 Repaint kit

For the casual reskinner...

I only had one side on photo to work from and that was in the black scheme; so accuracy is dodgy...

Union Pacific had only 5 of these units. 1300 was delivered in 1945 and 1301-1304 arrived in 1947.
Best guess is that the louvre pattern was the same.

1300 was delivered in basic black with either white or aluminum pinstriping and lettering.
1301-1304 may have been delivered in the yellow/gray scheme ?

There is one document in the Docs folder with details on how to assemble the shape files and texture information.

You will need to do your own in depth research to accurately reproduce selected units of your choice.

Even though basic textures have been provided, you will still need to provide prototypical logos and lettering etc as necessary.

I can't stress enough to _please_ read the instructions in the Docs folder...

*

Credits:

Original FM H10-44 shape file and hardware textures copyright Allen Norton used with permission.

Coupler and Airhose shapes and textures copyright David Rowe and Tim Muir.

Wheel face texture by Wayne Campbell courtesy Allen Norton.

Model detailed and textured for Union Pacific by Richard A. Percy.

The eng files have been setup for the files listed below, you may of course use different cab and sound files, editing the eng files to reflect your choices.

Requires FMswCab.zip

Download and install as directed into your common.cab folder

.cvf files have been provided

Requires FMswSnd.zip

Download and install as directed into your common.snd folder

.sms files have been provided

*

Lights:

The light settings have been set for LightFx. A brighter light ace which can be found on trainsim.com

If you do not use LightFx and do not wish to install it, then the lights may look a bit small.

Simply go into each eng file and double the radius of all the Type ( 0 ) lights.

*

These files were zipped up with folders enabled.

They should install to a folder called H10-44-UP-Reskin

You may also wish to install this to a temporary folder first.

*

Richard A. Percy

These files are for personal use only and may not be used for anything else other than personal use.
They may not be redistributed in any way, shape or form anywhere in the world without the express permssion of all people mentioned in this readme.

Models created totally from recycled electrons and no animals were harmed in any way during their production...

These files did not harm my computer when using them, they should not cause your computer to crash. These files are provided and given in good faith, but as I have no Control as to how you may use them, I can offer no warranty, nor guarantee any results.

Original File Name = H10-44-UP-Reskin.zip

Click here to download this file