Elvas Tower: Shay 2 truck-narrow gage geared steam locomotive-TSM resource kit - Elvas Tower

Shay 2 truck-narrow gage geared steam locomotive-TSM resource kit

Loosely based on the West Side Lumber Co. Shay number "5"

An Orginal Model by Allen Norton-B&O Guy"

Credits:

Model by "Me"

Couplers and pin pullers by "Tim Muir"

Wisdom and knowledge from "Captain Bazza"

The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs. It will have to be re-animated however.

No support is offered or will be given. Use the forum for questions.
-----------------------------------------------------------------
Legals:

Have fun and give proper credit.

I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning experience.
--------------------------------------------------------------
Model statistics;

Textures are not included with this kit. Be carefull about moving the
animated parts from their present locations as undesirable motions will
result.

This is an Open Rails model and won't work in MSTS Without major polygon
reductions. Also be sure when generating your model that the parts count
is below 95 or less. Sometimes in TSM you will get wierd part locations
upon generation and this is usually an indication of to many parts.

If you need to contact me you may do so here at Elvas Tower.

Thank you
Allen Norton-"B&O Guy"