Elvas Tower: Southern-Pacific_4-6-0_TSM-Resource-Kit - Elvas Tower

Jump to content

  • You cannot upload a new file

Southern-Pacific_4-6-0_TSM-Resource-Kit Rate File: -----

Screenshot
File Name
Southern-Pacific_4-6-0_TSM-Resource-Kit by B & O GUY 
Submitted
25 March 2015 - 12:02 PM
Last Updated
25 March 2015 - 12:17 PM
File Size
12.4MB (Estimated Download Times)
Views
2096
Downloads
77
Support Topic
Click here to visit support topic
"Train Sim Modeler" Southern-Pacific_4-6-0_TSM-Resource-Kit.
Models were constructed with "Train Sim Modeler"
for use with "Open Rails" and "MSTS"....
An Orginal Model by Allen Norton "Nortec"-B&O Guy"

Credits:
Model was built from drawings from "Dave Nelson"
Model by "Me"
Couplers, Air Hoses/with textures and Cut bars by "Tim Muir"

Has partial textures and no animations other than for PolyMaster
use for sub groups of parts.

The model can be imported by 3DCanvas and possibly 3DCrafter
for use in those programs. The scale is around 0.2....

No support is offered or will be given. Use the forum for questions.

--------------------------------------------------------
Legals:
You may paint it Purple, modify it, crumple it or smash it. There
are NO restrictions other than you must give proper credit to me
and any and all of the other contributors who have freely given of
their parts and time to make this project a success IF you release
it. You may "NOT" sell it nor include it in any payware group, route
or individually by itself. THIS IS FREEWARE.

This model is for "Open Rails and MSTS" only. You may not use this
shape file or any of it's textures for any other simulator or game.
No exceptions.

You must also include this document in it's completeness without
any modification toward your release of the model and or it's
textures.

You may contribute the model as FREEWARE to any web site as
a complete generated shape from Train Sim Modeler or 3DCanvas/
Crafter but you MUST also contribute your model to "ELVAS
TOWER" (elvastower.com)... The raw .dst shape file WILL NOT be
uploaded to any other web site but (elvastower.com)by me, I, YOU
or anyone else. This kit is for Elvas Tower only.
NO exceptions.

I or we are not responsible for any damage to your computer or
programs because of you loading this file on or in your Train Sim
Modeler or 3DCanvas/Crafter. You bear the sole responsibility for
any problems you may encounter. Any other problems you may
encounter while modeling and texturing the model are and will be
considered part of your learning curve.

Total poly count is approximately 21,500 faces for the
locomotive and 6,940 for the tender.

---------------------------------------------

Model statistics;

The trucks or bogies as they are called in TSM and MSTS are of a
higher detail than was available with MSTS models. They are also
of many seperate parts parented to the bogies and this was done
to keep from having any single high poly part's. All the part's move
and swing with the bogies just as they should.

Several textures have Paint Shop Pro 7 layered graphics included for
you to modify as you see fit. The only program that I know of other than
PSP is Photoshop that will accept layered PSP graphics. There may
be others that I'm not aware off. There will be included seperate BMP
files in 1024 X 1024 for people who don't have these programs.

The models are incomplete and Textures are not finished.

This kit is intended to be used by modelers for Open Rails and or
MSTS.
.
The model is setup with false animations for the use of PolyMaster for
doing the model with subobjects and LOD's after generating from TSM.
In PolyMaster you will remove all the false animations.

If you save the original .ZIP file and you make a mistake somewhere
along the line you can always go back to the original file.

And remember to save often during your work.

If you use these files and upload your model to the community you
could make a small mention of my name plus the accredited names
who have supplied couplers, lights and textures in your readme doc.
That's all thats necessary. If however you have something bad to say
about me than it would be better to say nothing at all.

Textures provided are the following

SP-00.BMP
SP-01.BMP
SP-03.BMP
SP-05.BMP
SP-06.BMP
SP-07.BMP
SP-08.BMP
SP-09.BMP
SP-10.BMP
SP-11.BMP
SP-11-1.BMP
SP-12.BMP
-------------------------
SP-00.PSP
SP-06.PSP
SP-11.PSP
SP-11-1.PSP
SP-12.PSP

Tim Muir textures for couplers and hoses.

BLANCK.BMP
BRAKEHSE.BMP
CPLER1.BMP

If you need to contact me you may do so here at Elvas Tower or at
Train-sim.com by post message.

This is the seventh in a series of models to be released at Elvas Tower.
Next will be. ?
SD18 high nose unit with dynamic brake and
Blomberg C trucks.
SD18 low nose unit with dynamic brake and
Blomberg C trucks.
SD18 low nose unit with dynamic brake and
ALCO Trimount C trucks.
SD24 high nose unit with dynamic brake, roof mount air tanks and
Blomberg C trucks.
SD24 lo nose unit with Far filter, dynamic brake, roof mount air tanks and
Blomberg C trucks.
E1-2-7-8's
FA-1's FB-1's
PA-1
There will be others such as Baldwin, Fairbanks Morse, ALCO and others.
Steam locomotives too.

No timeline is set for these.

Thank you
Allen Norton "nortec"-"B&O Guy"

Original File Name = Southern-Pacific_4-6-0_TSM-Resource-Kit.zip

  Download File
  • You cannot upload a new file


Toggle random files Random Files

Screenshot

File Name: Typical 1800's Sand House
In Category: Buildings
Screenshot

File Name: 1940'S Coca-Cola Highway Van Set Version 1.0
In Category: Vehicles

Download Statistics

Total Files
2,694
Total Categories
130
Total Authors
148
Total Downloads
120,352
Latest File:
Open Rails Sounds - EMD 645 (with roots blower) by ErickC  (submitted 03 March 2024 - 06:41 AM)

20 user(s) active in the past 15 minutes
19 guests, 0 Anonymous Users